SREP-18-40084A Data 1 sorption isotherms.xls

These data were measured for effect of initial Cu(II) concentration on adsorption capacity of Cu(II) onto different adsorbents (adsorbent dosage= 0.5 g, initial Cu(II) concentration = 10, 50, 100, 300, 500, 700 mg L^-1, initial solution pH = 5.0 ± 0.1, contact time = 25 h, temperature = 25°C), and plots for Langmuir and Freundlich isotherms for adsorption of Cu(II) onto different adsorbents (The legends of “Freundlich” are the same with that of “Langmuir”).<br>

本数据集用于探究初始Cu(II)浓度对不同吸附剂吸附Cu(II)容量的影响，实验条件设置如下：吸附剂投加量为0.5 g，初始Cu(II)浓度分别为10、50、100、300、500、700 mg·L⁻¹，初始溶液pH=5.0±0.1，接触时间为25 h，反应温度为25°C；同时包含不同吸附剂吸附Cu(II)的朗缪尔（Langmuir）吸附等温线与弗罗因德利希（Freundlich）吸附等温线绘图，其中“弗罗因德利希”的图例与“朗缪尔”的图例一致。