1.88kW BLDC Sensorless FOC - Sliding Mode vs Flux Observer

This dataset is in support of my planned research paper shortly to be submitted to "IEEE Transactions on Power Electronics".In this paper and dataset, speed and the position estimation of BLDC is done using the sensorless vector control method i.e., Field Oriented control (FOC) and observer. The implementation method is the known method of vector control, with the addition of SMO or flux observer gives the estimation of speed and the sensorless rotor position. The switching pattern of the 3-phase inverter is implemented using space vector modulation.DIfferences in this paper dataset can be seen as the author has included following , with analysis which can be drawn from seeing attached graphs -performance comparison using Sliding Mode Observer (SMO) and flux observerPWM switching frequency is varied 45 times from 20 kHz to 2 MHz , - will help decide MOSFETs switching frequency. (as in industries even 20kHz is used)Stability MarginsOpen Loop Control PerformanceTransfer Function CompensationClosed loop TuningRoot Locus of Uncompensated System and Compensated SystemBode Plot - magnitude and phasePole Zero Map of Uncompensated System and Compensated SystemUnit-Step Response of Uncompensated System and Compensated SystemNyquist plot of Uncompensated System and Compensated SystemNichols chart of Uncompensated System and Compensated SystemImpulse Response of Uncompensated System and Compensated SystemSinusoidal ExcitationCompensated System is after using SMO/Flux observer.All this is implemented on 32-bit Real-Time microcontroller. The pins usage not mentioned here are used for other General-Purpose-CAN,USB, RS485 etc.PFC is not included in this simulation as it is assumed that PF = 1.These brushless motors and controllers are used in many industries including medical e.g. in Positive Airway Pressure respirators,ventilator.This study comes in handy to decide when designing in practice for industries and also for academia purposes. The author has used these results in designing new 2-3 different complex models(incomplete), may be uploaded later.There is related dataset, where also 8-pole Y winding motor is used but of different specification - "200W BLDC Sensorless FOC - Sliding Mode vs Flux Observer" ,DOI: https://dx.doi.org/10.21227/8rz1-p666,