The Effects of Scalloping Width and Position on Jet Mixing of Lobed Nozzles|流体力学数据集|喷嘴设计数据集

ABSTRACT: A series of geometric models of lobed nozzles with a central plug was created by different scalloping positions and widths. The shapes of lower and upper edges, cutting depth were kept unchanged. In this study, by the use of numerical simulation, the effects of scalloped width and position on the performance of jet mixing in the pumping condition were analyzed. The results indicated that, as the position of scalloped lower edge kept constant, the radial position of the accelerated mixing region of sidewalls did not change. The accelerated mixing region is enlarged as scalloped width increased, while the growth rate of enlarged region is less than the growth rate of scalloping width. When the scalloped region with the same width moved outward in the radial direction, the mixing rate of the region of the lobe outer edges increased. However, the distance for complete mixing of the primary stream in the core region was increased. It was also found that inward moving of scalloped lower edge enhanced the effect of strengthening streamwise vortices but induced more pressure loss.