Experimental data generated on the study of triboelectrification of powder porous material during intrusion–extrusion process

/* ********** /* This work is licensed under a Creative Commons Attribution 4.0 International License. /* ********** Open access to experimental data generated by the project Electro-Intrusion (101017858, Horizon 2020, European Union) along with the research on the stability of hydrophobic porous materials to be used in intrusion-extrusion applications. Research pertaining to Task 2.1 (WP2). Underlying data for the publication Bartolomé, Luis et al. Triboelectrification During Water Intrusion–Extrusion into‐from Hydrophobic Nanopores. Advanced Materials Technologies 2024, 2401744. https://doi.org/10.1002/admt.202401744. Data related to Figures 3, 4, 5 and 6 in the article. The folder ‘HC8_Passive_DoubleElect’ contains the following: Experiments at room temperature (folder named ‘ROOM TEMP’) with different load resistances (folder named ‘LOAD RESIS’) at different compression/decompression rates (folder named 'RATE’) Experiments at temperature 5.5 ºC at different compression/decompression rates (Folder named ‘5p5_DEGREES’) The folder ‘FC8_Passive_DoubleElect’ contains the following: Experiment at room temperature Cycling experiment (folder named ‘CYCLING’) All the Excel files consist of four columns data obtained for the triboelectrification tests where first column is the time (named ‘Time*’), second one the voltage corresponding to the pressure (named ‘cDAQ1Mod1_ai1’), the third one the voltage of the experiment circuit (named ‘cDAQ1Mod1_ai3’) and the fourth one the current of the experiment circuit (‘cDAQ1Mod1_ai2’).