Study on the effect of different metal oxides on the performance of cobalt-based Fischer-Tropsch catalysts dataset

1.The data set includes the images, picture data and raw data involved in Figure 1-Figure 8 and Table 2 and Table 3 of the paper2.Figure 1 XRD characterization using PANalytical Empyrean X'pert instrument3.Figure 2 Characterization of catalyst morphology using a scanning electron microscope (JSM-7001F)4.Figure 3Characterization of catalyst morphology using transmission electron microscope (JEOL JEM-2010FEF)5.Figure 4 H-TPR measured by TP-5080 multifunctional adsorber6.Raman in Fig. 5 was obtained on a LabRAM HR Evolution Raman spectrometer7.XPS in Figure 6 was measured on an AXIS ULTRA DLD X-ray energy spectrometer8.In Figure 7, H-TPD was performed on a Micromeritics Atochem 2910 adsorber, CO-TPD was performed on an AMI300 fully automated chemisorption instrument, and TG was measured on a DTG-60 instrument.9.The evaluation data in Figure 8 were evaluated using a fixed bed reactor designed by the group for the catalysts.10.The data in Table 3 were measured by ICP analysis.11.The data in Table 4 were evaluated using a fixed-bed reactor designed by the group.12.Please refer to the paper introduction for more details on the above characterization