A 3-component receiver is pushed into ground by T-Rex at various depths to measure the ground motion from two source rods on two side of the receiver. Source rods were pushed into ground by mobile CP
This experimental program supports a broader project on validating methods to mechanistically develop relationships between cone penetration test measurements and the engineering properties of interme
Shear strength was measured on section halves using a GEISA automated vane shear (AVS) frame and device controller. The device is suitable for sediment not affected by cementation (i.e., saturated, cl
Shear strength was measured on section halves using a GEISA automated vane shear (AVS) frame and device controller. The device is suitable for sediment not affected by cementation (i.e., saturated, cl
SASW tests along Sensor Line 2 to obtain shear wave velocity profile for the 3D profiling inversion. Tests utilized the 4 geophone placed along the line during for the 3D profiling tests. Spacing bet
