2024_IEEE_TCAS2_vol72_no1

<h2>Title of Dataset</h2> <p>2024_IEEE_TCAS2_vol72_no1</p> <h2>ROBUK Dataset</h2> <p><strong>Numerical data for the following article:</strong></p> <h3>Title</h3> <p> UFERI-Ultra-Fast Energy Resolved Imager for next generation synchrotron experiments<br> <em>IEEE Transactions on Circuits and Systems II, Express Briefs</em> ; ISSN 1549-7747 — 2025 — vol. 72, iss. 1, pp. 108–112. </p> <h3>Authors</h3> <ul> <li>Marie Andrä</li> <li>Arkadiusz Dawiec</li> <li>Rafał Kłeczek</li> <li>Piotr Kmon</li> <li>Claude Menneglier</li> <li>Fabienne Orsini</li> <li>Piotr Otfinowski</li> <li>Paweł Gryboś</li> </ul> <h3>Affiliation</h3> <ul> <li>SOLEIL Synchrotron, France</li> <li>AGH University of Science and Technology, Kraków, Poland</li> <li>RIKEN SPring-8 Center, Japan</li> </ul> <h3>Dataset Contents</h3> <p>The set contains the data for the following figures:</p> <ul> <li><strong>Fig. 3.</strong> CSA feedback: a) simplified scheme, b) CSA output pulses for different modes of the capacitor CF discharge.</li> <li><strong>Fig. 4.</strong> Offset spread before (blue) and after (orange) the correction.</li> <li><strong>Fig. 5a.</strong> Differential spectra for several X-ray energies for IKRUM = 0.</li> <li><strong>Fig. 5b.</strong> Energy calibrations for different values of IKRUM.</li> <li><strong>Fig. 6.</strong> Count rate performance for three different settings of IKRUM. The best count rate performance is reached for IKRUM = 24 with a dead time τ = 14.5 ± 0.2 ns.</li> <li><strong>Fig. 7.</strong> Set of threshold scans in low noise operation mode with digitally assisted capacitor CF discharge technique (ON, dashed lines) and standard signal processing mode (OFF, continuous lines) for different incoming photon fluxes (low flux in blue until high flux in brown).</li> </ul> <h3>Data Format</h3> <ul> <li>Data in <code>.xlsx</code> file with description in each column.</li> <li>Data in <code>.txt</code> file with description in the file name.</li> </ul> <h3>File Structure</h3> <ul> <li><strong>Main folder:</strong> raw_data (ZIP file)</li> <li><strong>Subfolders:</strong> <ul> <li>data_fig3</li> <li>data_fig4</li> <li>data_fig5a</li> <li>data_fig5b</li> <li>data_fig6</li> <li>data_fig7</li> </ul> </li> </ul>