Research data supporting "Trapped Fields > 1 T in a Bulk Superconducting Ring by Pulsed Field Magnetization"

Research data supporting [Trapped Fields > 1 T in a Bulk Superconducting Ring by Pulsed Field Magnetization]. The Microsoft Excel file contains all data plotted in figures 1 to 5 in the main manuscript. For all pulsed field magnetization data, the sample was first cooled down from the normal state to the superconducting state then a pulsed field or a sequence of pulsed field was applied to it. The values of trapped field shown in the data file are the values recorded at 15 seconds after applying each pulsed field. For a multi-pulse, stepwise cooling sequence, the wait time between two successive pulses was from ~5 min (at 77 K) to ~15 min (at 55 K) to allow sufficient time for the sample to return to its operating temperature before applying the next pulse. Unless stated otherwise, the applied field and the trapped field were the peak value of the magnetizing pulse and the trapped field at the centre of the sample bore, respectively. See the main manuscript for more details.

本研究数据集支持《通过脉冲场磁化在整体超导环中捕获磁场超过 1 T》的研究。Microsoft Excel 文件包含了主文中图 1 至图 5 所展示的所有数据。对于所有脉冲场磁化数据，样品首先从正常态冷却至超导态，随后施加脉冲场或一系列脉冲场。数据文件中显示的捕获磁场值是施加每个脉冲场后 15 秒时记录的数值。对于多脉冲、逐步冷却序列，两次连续脉冲之间的等待时间从约 5 分钟（在 77 K 时）至约 15 分钟（在 55 K 时），以允许样品在施加下一个脉冲前有足够的时间恢复至其工作温度。除非另有说明，所施加的磁场和捕获磁场分别为磁化脉冲的峰值以及样品中心孔腔处的捕获磁场。更多详细信息请参阅主文。