Characterisation of Soil Physical Properties Across Seven Representative Sites at Boorowa Farm

This dataset contains soil physical property measurements from seven indicative sites across the CSIRO Boorowa Agricultural Research Station, each corresponding to a distinct soil type. The purpose of the data collection was to better understand the soil water holding potential of the different soils present on the farm.The measurements reported here are based on soil samples collected from each site, rather than in-field measurements. While in situ determinations of drained upper limit (DUL) and crop lower limit (CLL) were made during the 2020 winter cropping season, they are not included in this dataset.The collection includes:Soil textureTotal and organic carbonTotal nitrogen and sulfurSoil bulk densitySoil water retention data from both intact and repacked coresvan Genuchten (1980) model parameters fitted to develop soil water retention curvesSoil water retention measurements were conducted at the CSIRO Soil Physics Facility using standard methods (McKenzie et al., 2002):Suction tables (Method 504.01) for pressure potentials ≤ 600 cmPressure plates (Method 504.02) for pressure potentials at 5 and 15 barWater potential values were recorded in centimeters of water column, with approximate conversions to bars provided as a reference:10 cm (~0.01 bar), 30 cm (~0.03 bar), 50 cm (~0.05 bar), 100 cm (~0.1 bar), 340 cm (~0.33 bar), 600 cm (~0.59 bar), 5099 cm (~5 bar), and 15,296 cm (~15 bar)These data provide foundational information for evaluating soil hydraulic properties and supporting water management, modelling, and agricultural research across the site.Lineage: Summary of Soil Property Measurements and Methods1. Soil TextureUnits: %Method: Hydrometer analysisReference: Modified from SOP meth004 (CDPR), based on Gee & Bauder (1986) and Klute (1986) in Methods of Soil Analysis.2. Total Carbon (C)Units: %Method: LECO dry combustionReference: Method 6H5 (Rayment and Lyons, 2010)3. Soil Organic Carbon (SOC)Units: %Method: LECO dry combustion after acid treatmentReference: Method 6B3 (Rayment and Lyons, 2010)4. Total Nitrogen (N)Units: %Method: LECO dry combustionReference: Method 7A8_1 (Rayment and Lyons, 2010)5. Total Sulfur (S)Units: %Method: LECO dry combustionReference: Method 20A2_dry (Rayment and Lyons, 2010)6. Soil Moisture Characteristic MeasurementsUnits: Volumetric water content (cm³/cm³)Description: Measured on both intact and repacked soil coresMethod: Suction tables (504.01) and pressure plates (504.02), following McKenzie et al. (2002)Suction/Pressure Points (approx. bar equivalents):10 cm (~0.01 bar)30 cm (~0.03 bar)50 cm (~0.05 bar)100 cm (~0.1 bar)340 cm (~0.33 bar)600 cm (~0.59 bar)5099 cm (~5 bar)15,296 cm (~15 bar)Note: Pressure plates were used for 5 and 15 bar; other pressures were measured using suction tables.