Effect of Diamond-Like Carbon Coating on Preventing the Ingress of Hydrogen into Bearing Steel
收藏资源简介:
The failure of moving mechanical components is often accompanied by hydrogen embrittlement caused by hydrogen diffusion in steel. One considerable mechanism for hydrogen diffusion is its ingress from lubricant decomposition. We quantitatively investigated the ingress of hydrogen generated by lubricant decomposition into bearing steels using time-of-flight secondary ion mass spectrometry (ToF-SIMS). Deuterated lubricants were used to discriminate between the original hydrogen in steel and the hydrogen generated from lubricant decomposition. The highest concentration of deuterium was always near the raceway surface, and the concentration decreased gradually as the depth was increased. The diffused deuterium increased in a parabolic relation with the duration of friction. To protect steels against the ingress of hydrogen, we studied the effect of a diamond-like carbon (DLC) coating, which has a low diffusion coefficient of hydrogen. DLC reduced but did not completely prevent the ingress of hydrogen, which resulted from the reduction in the amount of hydrogen generated from the tribochemical and thermal decomposition of lubricants.
运动机械部件的失效常伴随钢中氢扩散引发的氢脆现象,其中一项重要的氢扩散机制是氢从润滑剂分解过程中渗入。本研究采用飞行时间二次离子质谱(ToF-SIMS),定量探究了润滑剂分解产生的氢向轴承钢的渗入过程:通过使用氘代润滑剂,可区分钢中原生氢与润滑剂分解产生的氢。实验结果显示,氘的最高浓度始终位于滚道表面附近,且随深度增加逐渐降低;扩散进入的氘含量随摩擦时长呈抛物线关系增长。为保护钢材抵御氢渗入,本研究考察了氢扩散系数较低的类金刚石碳(DLC)涂层的防护效果:DLC涂层虽可减少但无法完全阻止氢渗入,其作用源于降低了润滑剂经摩擦化学与热分解产生的氢总量。




