Imaging Temperature and Thickness of Thin Planar Liquid Water Jets in Vacuum - data

Data set pertaining to the article "Imaging Temperature and Thickness of Thin Planar Liquid Water Jets in Vacuum", published in Struct. Dyn. 10, 034901 (2023), https://doi.org/10.1063/4.0000188 .

The following data are provided:

(zip-)file/Folder
Description
Format
Extension

IR_images/calibration_data/vacuum

Snapshots from a thermographic movie of our flat jet running in vacuum, at thirty different background temperature. (A snapshot shown in Fig. 3a, rhs.)

temperature values per camera pixel (°C), 640 row * 480 columns, semicolon-separated ascii data

.asc

IR_images/calibration_data/1atm
As above, for our flat jet running in atmosphere. (Three snapshots shown in Fig. 2a.)
as above
.asc

IR_images/calibration_data/chipnozzle
As above, for a flat jet produced from a chip nozzle, and running in atmosphere.
as above
.asc

IR_images/raw_data
As above, for various conditions of the flat jet environment as detailed in table exp_settings.csv.
as above
.asc

IR_video
Two thermographic movies recorded of our flat jet at varied conditions of the jet environment detailed in table chamber_pressure.pdf.
Radiographic image stream, suitable for opening with free software Optris Pix Connect.
.ravi

FJ_cooling_2D.mph
Input file for 2D finite element simulation of our flat jet.
Input file suitable for Comsol software, proprietary format.
.mph

Y_Z_Temp_Comsol.txt
Ascii representation of our simulated temperature profile (Fig. S7 (SI)).
List of (y,z,T) tupels, with (y,z) in m and T in °C.
.txt

In case you have any questions regarding this data set please contact: Uwe Hergenhahn, [e-mail] .