A ferrofluid-based sensor to measure bottom shear stresses under currents and waves. Data set: Ferrofluids_Opt_2018_DiDonFranceesco

The experimental calibration of the system for measuring bed shear stresses under currents was carried out at the Hydraulic Laboratory of the University of Catania. In this experimental campaign the magnet S0805 and S0808 were used. The tests were conducted for several bottom configurations (smooth bottom; thin sand d50=0.24 mm; coarse sand d50=0.56 mm; and mixed sand 70% thin sand and 30% coarse sand). The goals of such tests were: to study the effects of the type of magnets and to carry out a preliminary analysis the ferrofluid behavior over sandy bottom.