Post-seismic deployment following the MLv4.8 event in Sierentz, France (RESIF-SISMOB)

Post-seismic deployment following the MLv4.8 event in Sierentz on 2022 September 10th. The instrumentation used for all stations is the SmartSolo IGU-16HR-3C node (24bit digitizers, 5Hz geophone, GNSS synchronized). The network is composed of a station located as close as possible to the epicenter calculated by Renass (station code 00x00) and of 5 concentric circles of radius 2, 4, 8, 12 and 18 km, whose station codes start with 01x, 02x, 03x, 04x, 05x, respectively. The stations are numbered clockwise on 2 digits ending the station code. This network was deployed between September 12th, 2022 and October 13th, 2022. The data are available in miniseed at 250Hz sampling rate. Raw data at 500Hz are available on demand. Sensor orientations were performed using a compass. This temporary network has been installed in addition to the stations around from permanent networks in France, Germany and Switzerland, or the RaspberryShake network (codes FR/RA, LE, CH and AM, respectively).