Build instructions and design files for 'An affordable and miniature ice coring drill for rapid acquisition of small iceberg samples'

This dataset provides all the design files necessary to replicate the iceberg coring drill. Please refer to the manuscript published in HardwareX - https://www.sciencedirect.com/science/article/pii/S2468067220300109 Please also refer to the instructions in the file 'build_instructions.pdf' The 3D printed parts are printed in nylon using selective laser sintering (SLS). SLS 3D printing is not required, however, and 3D printed parts can also be printed using more traditional 3D printers and filaments (e.g., PLA, PETG, or ABS). The design files include .STL and .STEP files for the 3D printed and machined parts, respectively. There are no metal alloy requirements for the machined parts. The 3D printed parts were constructed using SLS nylon, though they can also be constructed using PLA, PETG, and/or ABS, and the metal parts are machined using aluminium, stainless steel, spring steel, and knife steel, as indicated in the bill of materials table.本数据集提供了复刻冰山取芯钻机所需的全部设计文件。请参阅发表于HardwareX的研究论文：https://www.sciencedirect.com/science/article/pii/S2468067220300109 另请参阅文件'build_instructions.pdf'中的操作说明。 所用3D打印件采用选择性激光烧结（Selective Laser Sintering, SLS）工艺以尼龙材料打印而成。不过并非必须使用SLS工艺进行3D打印，3D打印件也可通过更为常规的3D打印机与耗材（如PLA、PETG或ABS）制作。 本数据集的设计文件分别包含了3D打印件的.STL格式文件与机加工零件的.STEP格式文件。机加工零件无特定金属合金材质要求。 尽管3D打印件可采用PLA、PETG和/或ABS材料制作，但本次制作时使用的是SLS尼龙材料；而金属零件则需按照物料清单表格所示，采用铝合金、不锈钢、弹簧钢以及刃具钢进行机加工。