Data for the publication entitled - " Validation of 3D printed MAYO Tubes and Stethoscope in Simulated Medical Environment – Tools Fabricated with Additive Manufacturing for Emergency Care"

Data for the publication entitled - " Validation of 3D printed MAYO Tubes and Stethoscope in Simulated Medical Environment – Tools Fabricated with Additive Manufacturing for Emergency Care"
Please, always refer to the original article as well if you use any of the datasets and/files.

1.) Raw_Data.xlsl - raw data containing the results of the measurements
2.) MAYO_evaulation_sheet.docx - evaulation sheet used for validation of MAYO tubes
3.) Stethoscope_evaulation_sheet.docx - evaulation sehhet used for the validation of stethoscopes
4.) MAYO_tubes_3_final.stl - 3D printing files for MAYO tubes

The 3D printed stethoscope has been printed out using the Glia model, published by Pavlovsky et al.: Pavlosky A, Glauche J, Chambers S, Al-Alawi M, Yanev K, Loubani T (2018) Validation of an effective, low cost, Free/open access 3D-printed stethoscope. PLoS ONE 13(3): e0193087. https://doi.org/10.1371/journal.pone.0193087