Experimental data related to the publication: "On the microplasticity and dynamic strain aging in an FeAlCrMo complexconcentrated alloy"

Data related to the research article "On the microplasticity and dynamic strain aging in an FeAlCrMo complex-concentrated alloy" (https://doi.org/10.48550/arXiv.2504.11591, https://doi.org/10.1016/j.msea.2025.148437). The article figures were produced solely from these data sets employing data processing methods described therein. Note that 'def' refers to deformation data, 'AE' refers to acoustic emission data, '300C' refers to tests conducted at 300 °C, '400C' refers to tests conducted at 400 °C. For detailed experimental conditions see the manuscript. 1. Deformation data files, related to Fig. 2 and 3: def_300C.csvdef_400C.csvdef_400C_cyclic.csv The first column represents Time [s], the second column represents Engineering stress [MPa]. The strain rate was in each case 10^{-4} per second. 2. Acoustic emission (AE) data files: (a) Raw continuous AE signal data, related to Fig. 2 and 4: AE_300C.datAE_400C.dat Format: Binary 1D array (time series), float32, little-endianSampling rate: 2 MHzAmplitude units: VoltsScaling: None (data scaled by the acquisition device) (b) AE counts, related to Fig. 3: AE_400C_cyclic.csv The first column represents Time [s], the second column represents Counts per AE event, the third column represents Cumulative AE counts. 3. High-resolution SEM/EBSD images (related to Fig. 1) are available directly in the PDF and web version of the manuscript (published journal version).