Data for: Molecularly imprinted polymer sensors for analysis of CA-125 on serum

Data_CA-125_calibration_ electrochemical - Calibration curve made from the data provided by the SWV technique, using the standards with the concentrations of ranging from 0.01 to 1000 U/mL of CA-125, in PBS buffer, pH 7.2 (P1 to P10) and data duplicate (P1_dup to P10_dup) and triplicate (P1_trip to P10_trip). Data_polimerization_electrochemical - Electropolymerization with pyrrol by CV in PBS (pH 7.2), one cycle (1cycle), five cycles (5cycles) and ten cycles (10cycles). Data_CA-125_calibration_ optical - Calibration curve made from the data provided by the SPR technique, using the standards with the concentrations of ranging from 0.01 to 1000 U/mL of CA-125, in PBS buffer, pH 7.2 (Calibration_P1 to P8 and Calibration_P9 to P10). Data_construction_optical - Electropolymerization with pyrrol by CV in PBS (pH 7.2), one cycle (1cycle) and two cycles (2cycles). SPR_sensorgramme recorded from the electropolymerization process.电化学CA-125校准数据集（Data_CA-125_calibration_electrochemical）：基于方波伏安法（Square Wave Voltammetry, SWV）技术获取的数据绘制校准曲线，实验采用浓度范围为0.01~1000 U/mL的CA-125标准品，反应体系为pH 7.2的磷酸盐缓冲液（Phosphate Buffered Saline, PBS），包含P1至P10共10组样本，同时设有重复实验数据：双平行样本（P1_dup至P10_dup）与三平行样本（P1_trip至P10_trip）。 电化学聚合数据集（Data_polimerization_electrochemical）：在pH 7.2的PBS缓冲液中，以吡咯（pyrrol）为单体，采用循环伏安法（Cyclic Voltammetry, CV）进行电化学聚合的实验数据，分别设置1次循环（1cycle）、5次循环（5cycles）与10次循环（10cycles）的扫描参数。 光学CA-125校准数据集（Data_CA-125_calibration_optical）：基于表面等离子体共振（Surface Plasmon Resonance, SPR）技术获取的数据绘制校准曲线，实验采用浓度范围为0.01~1000 U/mL的CA-125标准品，反应体系为pH 7.2的PBS缓冲液，数据分为Calibration_P1至P8以及Calibration_P9至P10两组。 光学传感构建数据集（Data_construction_optical）：在pH 7.2的PBS缓冲液中，以吡咯为单体，采用CV进行电化学聚合的实验数据，分别设置1次循环（1cycle）与2次循环（2cycles）的扫描参数；同时包含聚合过程中记录的SPR传感图（SPR_sensorgramme）。