Experimental Observation of Permeability Changes In Dolomite at CO2 Sequestration Conditions

Injection of cool CO2 into geothermally warm carbonate reservoirs for storage or geothermal energy production may lower near-well temperature and lead to mass transfer along flow paths leading away from the well. To investigate this process, a dolomite core was subjected to a 650 h, high pressure, CO2 saturated, flow-through experiment. Permeability increased from 10–15.9 to 10–15.2 m2 over the initial 216 h at 21 °C, decreased to 10–16.2 m2 over 289 h at 50 °C, largely due to thermally driven CO2 exsolution, and reached a final value of 10–16.4 m2 after 145 h at 100 °C due to continued exsolution and the onset of dolomite precipitation. Theoretical calculations show that CO2 exsolution results in a maximum pore space CO2 saturation of 0.5, and steady state relative permeabilities of CO2 and water on the order of 0.0065 and 0.1, respectively. Post-experiment imagery reveals matrix dissolution at low temperatures, and subsequent filling-in of flow passages at elevated temperature. Geochemical calculations indicate that reservoir fluids subjected to a thermal gradient may exsolve and precipitate up to 200 cm3 CO2 and 1.5 cm3 dolomite per kg of water, respectively, resulting in substantial porosity and permeability redistribution.