Emissions, spectrum and simulation data for ammonia/hydrogen blends at a fixed lean equivalence ratio (0.65)

Set of data was obtained for various NH3/H2 blends using an industrial scale swirl burner with a swirl no, Sg = 1.05. Exhaust emissions was measured by a bespoke state-of-art Quantum Cascade Analyser (CT5100) for various blends with an equivalence ratio of 0.65. Emissions data (N2O, NO, N2O, NH3) at set of fixed thermal powers and Re are provided in the 1st and 2nd sheet,respectively, titled 'Emissions Data - Thermal Powers' and 'Emissions Data - Re'. A Blue-wave StellerNet CMOS spectrometer was used to measure the radicals emitted from the previously mentioned blends. This spectrum data is provided in the third, fourth and fifth sheet, titled, 'Spectrum_Data - 20 kW', 'Spectrum_Data - 85-15' and 'Spectrum_Data - Re'. Simulation data from Chemkin are provided in the sixth and seveth sheet, titled, 'Chemkin - Th P' and 'Chemkin - Re No.' Finally, data for N2O ROP analysis is given in the eigth and ninth sheet, titled, 'N2O ROP Analysis - 15 kW' and 'N2O ROP Analysis - 30000'.Research results based upon these data are published at https://doi.org/10.1016/j.combustflame.2022.112299