Dataset associated to D5.4 of EasiZero project – USTUTT EOTA wall data

This document is part of D5.4, consisting of: Datasets of measured data from T5.3 Explanatory files containing experimental set-up and sensor placement description Each partner delivers a separate set of files. The present report is linked to the dataset generated by USTUTT. The dataset consists of 7 data files and 3 descriptive files: -"EZ_USTUTT_EOTA-Test-2025_data-description.txt" - Describes the context of the data acquisition and the corresponding files within the scope of the EOTA-test -"EZ_USTUTT_EOTA-Test-2025_Sensor Positions.pdf" - Visually describes the position of sensors within the cross-section of the wall assemblies-"EZ_USTUTT_EOTA-Test-2025_Test procedure.pdf" - Describes the general test procedure defined by EN 16383 and the timeline of the construction and test process-"EZ_USTUTT_EOTA-Test-2025_AirTemp.csv" - Raw air-temperature data gathered by thermal sensors-"EZ_USTUTT_EOTA-Test-2025_experimental-description.csv"- Additional descriptional data on the performed testing cycles and setpoints in table format, as described in "EZ_USTUTT_EOTA-Test-2025_Test procedure.pdf"-"EZ_USTUTT_EOTA-Test-2025_Heatflux.csv" - Raw heatflux data gathered by heatflux-sensors throughout the wall assemblies-"EZ_USTUTT_EOTA-Test-2025_Sensor description.csv" - A table containing every thermal, hygrothermal and heatflux-measuring sensor used during the testing process-"EZ_USTUTT_EOTA-Test-2025_SHT31-in-brick.csv" - Raw hygrothermal data gathered by hygrothermal sensors used to monitor conditions within 2 brick walls-"EZ_USTUTT_EOTA-Test-2025_SHT31-sensors.csv" - Raw hygrothermal data gathered by hygrothermal sensors throughout all wall assemblies at differing positions-"EZ_USTUTT_EOTA-Test-2025_Surface-temp.csv" - Raw surface-temperature data gathered by thermal sensors on the top surface of all wall assemblies