Tribometer pin-on-disc: Cr100 sphere against lead cast bronze coated disc

Seven pin-on-disc tests performed between Cr100 sphere (9.52mm diameter) and SAE 1015 steel–AMS 5060 discs with cast lead bronze (22-27 % Pb, 3-4 %
Sn and Cu remaining part) coating. Dry conditions. Room ambient control: 23 °C and 50% (rel. humidity). Track radius, sliding speed, sliding distance are all indicated in the file name. "GROUNDSURF" files correspond to freshly ground coating without any presence of copper oxide. Normal load on all tests: 10 N reference mantained with a PID controller acting on the Z displacement of the tribometer.

Files contain data on: tangential force (Fx), normal force (Fn), coefficient of friction (COF), wear depth (Z depth), timestep.

Tests performed on MFT-5000 multi function tribometer.

Financed by the European Union - NextGenerationEU (National Sustainable Mobility Center CN00000023, Italian Ministry of University and Research Decree n.
1033 - 17/06/2022, Spoke 11 - Innovative Materials & Lightweighting). The opinions expressed are those of the authors only and should not be considered as
representative of the European Union or the European Commission’s official position. Neither the European Union nor the European Commission can be held
responsible for them.