機器設備介紹

Product機器設備介紹Ventrac4500Y曳引機可另外加裝4組輪胎，最大傾斜角度30度，輪胎選用低胎壓巧克力胎，可以減輕車輛對草地的擠壓，使行走時降低最草皮的損壞。油壓系統採用自動起伏式油壓，可以隨著地形自由起伏。VentracMT720刈草台搭配三組旋刀，最大割刈寬度183公分，割刈高度約2.54-12.7公分。搭配4500Y曳引機，可以依照不同地形起伏割刈，讓草皮割刈後保持相同高度。割刈草台後方搭配小型滾輪，將割刈後的草皮倒向同面，經過特定路線割刈，能夠讓完成後的草皮成陰陽面軌跡。VentracRV602吸葉機搭配曳引機＋刈草台使用，在割刈後立即收集草穴及樹葉，能夠減少人工收集草屑的時間，最大收集量0.45m³，最高升舉高度約152公分，能將草屑收集至運輸車或指定位置。另外可以單獨使用吸葉機之升縮管進行地面吸葉功能。VentracEA600實芯打孔機作業寬度152公分，深度約6-7公分，密度約99芯孔/㎡，利用十字震動鑽入草皮中，使得草皮土壤產生裂縫來鬆動土壤，增加土壤中通氣性及透水性，實心孔針鑽入時，能夠破壞草根，來促進草根分孽來增加草皮密度。打孔後可以透過後方小滾輪將表層土壤稍微托平。ToroPropass200拖曳式鋪沙機需搭配Ventrac4500曳引機，鋪沙寬度(可調整)最大寬度達9.1公尺，最大載沙量0.715立方公尺，運用於填補打孔後的填沙，填沙能夠增加土壤中透水介質，利用機器鋪沙取代人工灑播，且達到均勻噴沙的效果。主要使用場域如：運動球場、公園大草皮…等大面積範圍草皮區。

The Ventrac 4500Y traction machine is capable of being fitted with four additional sets of tires, with a maximum inclination angle of 30 degrees. The tires are selected with low-pressure chocolate tires, which can reduce the vehicle's compression on the grass, thereby minimizing damage to the turf during movement. The hydraulic system employs an automatic起伏 (up-and-down) hydraulic system, allowing for free movement with the terrain. The Ventrac MT720 mowing deck is equipped with three rotating blades, with a maximum cutting width of 183 centimeters and a cutting height of approximately 2.54-12.7 centimeters. When paired with the 4500Y traction machine, it can cut the grass at the same height across different terrains. The rear of the mowing deck is equipped with a small roller to direct the cut grass to the same side, following a specific path to create a zigzag pattern on the finished turf. The Ventrac RV602 leaf collector can be used in conjunction with the traction machine and mowing deck to immediately collect grass clippings and leaves after mowing, thereby reducing the time required for manual collection. The maximum collection volume is 0.45 m³, and the highest lifting height is approximately 152 centimeters, capable of collecting grass clippings into a transport vehicle or designated location. Additionally, the leaf collector can be used independently with the telescopic tube for ground leaf collection. The Ventrac EA600 solid core punching machine has an operating width of 152 centimeters, a depth of approximately 6-7 centimeters, and a density of about 99 cores per square meter. It uses cross-vibration to drill into the turf, creating cracks in the soil to loosen it, thereby improving the soil's aeration and permeability. The solid core pins can break the root system to promote branching and increase turf density. After punching, the topsoil can be slightly leveled by the rear small roller. The ToroPropass 200 tow-behind sand spreader requires pairing with the Ventrac 4500 traction machine, with a maximum adjustable spreading width of up to 9.1 meters and a maximum carrying capacity of 0.715 cubic meters. It is used for filling in sand after punching, increasing the permeability of the soil medium, and replacing manual sowing with machine-based spreading for a uniform sanding effect. The main application areas include sports fields, large grass areas in parks, and other large-scale turf areas.