Moored current and temperature measurements in the Faroe Bank Channel overflow region at mooring site S3, June 2012-June 2013@en

The temperature measurements were made by accurate temperature sensors on Sea-Bird Electronics SBE39 and SBE56, and SBE37 instruments, as well as by the temperature sensors on current meters. Current measurements were made by Anderaa current meters (RCM7/8), a Nortek current meter (Aquadopp), and various ADCPs (RD-Instruments 75/150/300 kHz Workhorse, Anderaa 600 kHz RDCP, and Nortek Continental). Instrumentation and other details of the moorings can be found in Ullgren et al. (2016). The sampling rate was 15 s for SBE56s, 5 min for SBE37s and SBE39s, 5-60 min for ADCPs, 1 h for RCMs, and 20 min for the Aquadopp. […]本次温度观测由海鸟电子（Sea-Bird Electronics）生产的SBE39、SBE56及SBE37型高精度温度传感器，以及海流计搭载的温度传感器完成。海流观测则采用了安德拉（Anderaa）RCM7/8型海流计、诺泰克（Nortek）Aquadopp型海流计，以及各类声学多普勒流速剖面仪（ADCP），具体包括RD仪器（RD-Instruments）75/150/300 kHz Workhorse型、安德拉600 kHz RDCP型以及诺泰克Continental型。本数据集锚系潜标的仪器配置及其他相关细节可参阅Ullgren等人2016年的研究成果。采样间隔参数如下：SBE56型传感器为15秒，SBE37与SBE39型传感器为5分钟，ADCP为5至60分钟，RCM型海流计为1小时，Aquadopp型海流计为20分钟。[…]