Laser altimeter data obtained over sea-ice during the IceBird Summer campaign in Jul-Aug, 2018; profile P6_211_ASIMBO_2018_SBLA_20180731T1556_83.17_-60.56_thr06_data_Vers5@en
收藏资源简介：
Sea ice surface roughness data were obtained during the IceBird Summer campaign in Jul-Aug, 2018 with a Single Beam Laser Altimeter (SBLA) mounted inside an electromagnetic system (EM-Bird) towed at 10-30 m height above surface by an Airplane (Basler BT-67, Polar-6). A method developed by Hibler (1972) was used to a) isolate the surface profile from low-frequency variations associated with the aircraft motion and b) to identify pressure ridge sails. The processing steps are described in https://epic.awi.de/id/eprint/56364/. We applied a ridge detection threshold of 0.6 m, which means that only sails higher 0.6 m are detected. Version and name of the processing routine: Laser_Altimeter_Processing_VS5_06_20.py (vers.5, Feb 22, 2024, https://gitlab.awi.de/sitem/sbla_processing.git). SBLA records (ASTECH - LDM) are provided at a sampling rate of 100 Hz. Sensor accuracy is 2 cm with a beam diameter at surface of 6.3 cm. This specific dataset was obtained on 20180731T1556. It includes recorded altimeter readings, the derived surface elevation and width/height/spacing of detected pressure ridge sails. Note on data quality: 6.3 cm . File name: [DMS/PANGAEA Campaing Identifier] + [DEVICE] + [DATE/TIME] + [LAT/LON] + [Detection Threshold] + [Object] + [Version] + [Format]
本数据集的海冰表面粗糙度数据采集于2018年7-8月的IceBird夏季科考任务，搭载于电磁系统（EM-Bird）内的单波束激光高度计（Single Beam Laser Altimeter，SBLA）由巴斯勒BT-67型飞机（极地6号，Polar-6）拖曳至距海面10-30米高度处开展观测。 研究采用Hibler（1972）提出的方法，完成两项核心处理任务：一是从与飞机运动相关的低频噪声中分离出海面高程剖面，二是识别冰脊帆体（pressure ridge sails）。 具体处理流程详见https://epic.awi.de/id/eprint/56364/。 本次研究设置的冰脊检测阈值为0.6米，即仅识别高度大于0.6米的冰脊帆体。 处理程序的版本与名称为：Laser_Altimeter_Processing_VS5_06_20.py（版本5，2024年2月22日，代码仓库地址：https://gitlab.awi.de/sitem/sbla_processing.git）。 单波束激光高度计记录数据（ASTECH-LDM）的采样率为100赫兹，传感器精度为2厘米，地表激光光斑直径为6.3厘米。 本数据集的采集时间为2018年7月31日15时56分（20180731T1556）。 数据集包含原始高度计读数、反演得到的海面高程，以及已识别冰脊帆体的宽度、高度与间距信息。 数据质量说明：6.3厘米（注：原文此处未补充完整，保留原表述）。 文件名命名规则：[DMS/PANGAEA科考任务标识] + [设备名称] + [日期/时间] + [经纬度] + [检测阈值] + [目标类型] + [版本号] + [文件格式]
