木工裝潢驗收5部曲這樣驗就對了

 好房網News記者黃彥翔／台北報導 木工在裝修過程中佔據了重要的地位，施工的品質和材料有關，也和施工技術有關聯。在木工驗收過程中，除了要注意施工的穩固性，也要留意接縫和水平等細節部分。從事木工多年的陳師傅分享驗收技巧，在木工驗收時注意五個細節，符合標準即可安心使用。 1.施工照設計圖，現在裝潢基本上都是依照設計圖進行，要檢查實體與設計圖有沒有一致。還有，施工時候就必須看好材料，驗收完才發現材料不一樣，可就虧大了。 2.檢查櫃體的穩固性，做固定的櫃體基本上用「手搖」是不會晃動的，若有搖晃可能是固定點不夠多，或安裝時不夠牢固，需再仔細檢查。不過有些裝飾性結構則是例外。 3.結構是否直平，正確的木工做法都應是直平的，觀察家具的構造，在水平面還是垂直面上都應該是如此。水平方向的檢查方式可使用鉛筆或彈珠做輔助，基本上是不會滾動的。 4.檢查精細程度，在櫃體和櫃門在關閉的時候應嚴密緊實，以及櫃門關閉時，合頁一側的櫃門跟櫃體用手摸應是平順的，若有參差感代表櫃門沒有安裝好。還有，櫃門開關時操作要輕便，以及不發出異聲。 5.整齊美觀，完工的表面應無明顯色差，拼花和紋理都須有一致性；檢查拼花接縫是否嚴密，合格的木質拼花，需做到緊密無縫隙或者有統一的間隔距離。另外，有做貼皮的話，也要留意貼皮的平整無凸出，接合處有殘膠也會影響上漆。最後，陳師傅也提醒，若是裝潢完覺得甲醛味很重，是因為木作的合板建材都會添加膠合劑，是甲醛的來源，可以使用甲殼素塗料分解甲醛，達到除臭的效果，住起來也更健康。 文章來源：好房網News   服務項目：木工裝潢室內裝修統包工程服務地區：嘉義、台中、台南、高雄、彰化相關搜尋：木工裝潢費用 木工裝潢師傅室內裝修價格室內裝修工程 統包的意思統包工程 【聯絡我們】

In the process of home renovation, carpentry occupies a significant position, as the quality of construction and materials is closely related to the construction techniques. During the carpentry acceptance process, attention should be paid not only to the stability of the construction but also to the details such as joints and levels. A seasoned carpenter, Chen Master, shares his acceptance techniques, emphasizing five key details during the carpentry acceptance process to ensure the use of standards. 1. Construction in accordance with the design drawing, as modern decoration generally follows the design drawing, it is necessary to check for consistency between the physical structure and the design drawing. Moreover, materials should be carefully selected during construction; discovering discrepancies only after acceptance would be a significant loss. 2. Inspect the stability of the cabinets, fixed cabinets should not wobble with a 'hand shake' test, indicating insufficient fixing points or inadequate firmness during installation. However, some decorative structures may be exceptions. 3. Check for straightness and flatness, proper carpentry should always be straight and flat, observing the furniture's structure, both horizontally and vertically should be the case. Horizontal checks can be assisted by a pencil or a ball, which should not roll. 4. Inspect the precision, cabinets and doors should be tightly sealed when closed, and the sides of the doors that close with the cabinet should be smooth to the touch without any discrepancies, indicating improper installation of the door. Additionally, the operation of the door opening and closing should be light and silent. 5. Neatness and aesthetics, the finished surface should have no obvious color differences, and patterns and textures should be consistent; check the tightness of the joints in the patterns, qualified wooden patterns should be tightly无缝隙 or have uniform spacing. If there is any film on the surface, attention should also be paid to the flatness of the film without any protrusions, and any residue adhesive at the joints may affect painting. Finally, Chen Master also reminds that if there is a strong smell of formaldehyde after decoration, it is because composite materials used in woodwork all contain adhesives, which are the source of formaldehyde. Shellac paint can be used to decompose formaldehyde, achieving the effect of odor removal and promoting a healthier living environment. Source: Houfangwang News Service Items: Carpentry decoration, indoor decoration package engineering services, service areas: Chiayi, Taichung, Tainan, Kaohsiung, Changhua Related Searches: Carpentry decoration cost, carpentry decoration master, indoor decoration price, indoor decoration engineering, all-inclusive engineering, [Contact Us]