Cumulative inaccuracies in implementation of additive manufacturing through medical imaging, 3D thresholding, and 3D modeling: A case study for an end-use implant

This data belongs to the original scientific article that is “Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant” by Jan Sher Akmal, Mika Salmi, Björn Hemming, Linus Teir, Anni Suomalainen, Mika Kortesniemi, Jouni Partanen, and Antti Lassila published with MDPI in Applied Sciences (Switzerland) Special Issue — 3D Printing of Bioactive Medical Device . It contains medical CT-images of a sus domesticus acquired using a Siemens Somatom Definition Edge CT system. Please cite the original scientific article if you use this data as follows: Akmal, J.S.; Salmi, M.; Hemming, B.; Teir, L.; Suomalainen, A.; Kortesniemi, M.; Partanen, J.; Lassila, A. Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant. Appl. Sci. 2020, 10, 2968. https://doi.org/10.3390/app10082968本数据集源自发表于MDPI旗下《Applied Sciences (Switzerland)》（《应用科学（瑞士）》）特刊「生物活性医疗设备3D打印（3D Printing of Bioactive Medical Device）」的原创科研论文《基于医学成像、3D阈值分割（3D Thresholding）与3D建模（3D Modeling）的增材制造（Additive Manufacturing）实施累积误差：一款最终用途植入物（End-Use Implant）的案例研究》，作者为Jan Sher Akmal、Mika Salmi、Björn Hemming、Linus Teir、Anni Suomalainen、Mika Kortesniemi、Jouni Partanen及Antti Lassila。数据集包含使用西门子Somatom Definition Edge CT系统采集的家猪（Sus domesticus）医用计算机断层扫描（Computed Tomography，简称CT）图像。若使用本数据集，请按如下格式引用原论文：Akmal, J.S.; Salmi, M.; Hemming, B.; Teir, L.; Suomalainen, A.; Kortesniemi, M.; Partanen, J.; Lassila, A. Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant. Appl. Sci. 2020, 10, 2968. https://doi.org/10.3390/app10082968