Dataset of Operational Energy of Forty Andean Buildings from 1980 to 2020

The files presented in this repository are structured in three main folders. The first one 01_OperationalEnergyDATA, contains a file named STOE.xlsx, which summarizes the operational energy data of the 40 sample houses. The second folder 02_SimulationDATA, contains 4 subfolders P1, P2, P3 and P4, each one of them allocates the ten simulation files (.dsb) corresponding to each sample and period (P). Moreover, the second folder contains three excel files, Building_Features.xlsx, Measuraments&Simulations_Results.xlsx and Measurements.xlsx, all of them related to morphological/materials characteristics and validation and simulation reports of each sample. Finally, the third folder 03_ClimateDATA, contains two files, Climate_Data_Forupdate.xlsx and ECU_CUENCA-_WEC_2022.epw, both related to the climate data needed for simulations. The detailed review of each folder is described below: 01_OperationalEnergyDATA The STOE (Specific Total Operational Energy), accounts for the summatory of space heating and space cooling (sh + sc), lighting and electrical appliances (l + e) and Domestic Hot Water and Cooking (d + c), divided by the total floor area of each residential building. This value is calculated for each of the forty houses in the study accounting both annually and a 50-years lifespan consumption. These results are shown in the repository in the file named STOE.xlsx. 02_SimulationDATA In First instance, this section presents the Building_Features.xlsx table that contains the raw data from the envelope materials of each one of the 40 sample buildings. The Measurements.xlsx file contains the raw data measured in situ from eight houses used in the study to validate the simulations. Furthermore, the Measurements&Simulations_Results.xlsx file, this table contains the raw data from each one of the eight samples measured in-situ and simulated in DesignBuilder accordingly. Lastly, this section presents 40 DesignBuilder Files (.dsb) one for each of the 40 analysed houses and stored in separate .dsb files, named using the format P#_S#, where P represents the period (decade), and S represents the sample number. Each file is configured according to the unique morphology and the materials are taken from the file Building_Features.xlsx . The intensity and schedule of lighting, equipment and occupancy were established as a common setting for all forty samples. 03_ClimateDATA To begin with, this section presents the file Climate_Data_Forupdate.xlsx is an excel table, which was created through the climate data gathered during July and August from the weather station ICUENC29 (coordinates: 2.89°S, 79.01°W, altitude: 2564 masl) Finally, the second file is ECU_CUENCA_IWEC_2022.epw which is an Energy Plus Weather file updated with the information collected from the meteorological station from July 1, 2021, at 12:04 AM to August 31, 2021, at 11:59 PM, with a sampling interval of 1-hour.本仓库内的文件通过三个主要文件夹进行组织。第一个文件夹01_OperationalEnergyDATA内含名为STOE.xlsx的文件，该文件汇总了40个样本住宅的运行能耗数据。第二个文件夹02_SimulationDATA包含P1、P2、P3、P4四个子文件夹，每个子文件夹均存放对应于各时段（P）与样本的10个.dsb格式模拟文件。此外，该文件夹还包含三个Excel文件：Building_Features.xlsx、Measuraments&Simulations_Results.xlsx与Measurements.xlsx，均与各样本的形态/材料特性、验证及模拟报告相关。第三个文件夹03_ClimateDATA内含Climate_Data_Forupdate.xlsx与ECU_CUENCA-_WEC_2022.epw两个文件，均与模拟所需的气候数据相关。各文件夹的详细说明如下： 01_OperationalEnergyDATA STOE（Specific Total Operational Energy，总单位运行能耗）为空间供暖与空间制冷（sh+sc）、照明与电器用电（l+e）以及生活热水与烹饪能耗（d+c）的总和，除以各住宅建筑的总建筑面积。本研究针对40栋住宅分别计算了该数值，涵盖年度能耗与50年使用周期的总能耗。上述结果已汇总至本仓库的STOE.xlsx文件中。 02_SimulationDATA 首先，本板块内含Building_Features.xlsx表格，收录了40个样本建筑围护结构材料的原始数据。Measurements.xlsx文件包含本研究中用于验证模拟的8栋住宅的现场实测原始数据。此外，Measuraments&Simulations_Results.xlsx表格收录了8个样本的现场实测数据与DesignBuilder模拟所得的对应原始数据。最后，本板块包含40个DesignBuilder模拟文件（.dsb格式），对应40个分析住宅，分别存储为以P#_S#命名的.dsb文件，其中P代表时段（十年段），S代表样本编号。每个文件均基于独特的建筑形态进行配置，所用材料均取自Building_Features.xlsx文件。照明、设备用电与人员占用的强度及运行调度方案，均设置为40个样本的统一配置。 03_ClimateDATA 首先，本板块的Climate_Data_Forupdate.xlsx为Excel表格，其数据源自ICUENC29气象站在2021年7月与8月采集的气候信息（坐标：2.89°S，79.01°W，海拔：2564米（masl））。最后一个文件为ECU_CUENCA_IWEC_2022.epw，即EnergyPlus气象文件（Energy Plus Weather File），其数据更新自2021年7月1日00:04至2021年8月31日23:59的气象站采集信息，采样间隔为1小时。