Time series of salinity, temperature, dissolved oxygen and currents measured at several depths with an Autonomous moored observatory in the Havstens Fjord, Western coast of Sweden, December 2010 - April 2011@en

The mooring has a ballast weight at the bottom, then datalogger in a mooring frame attached to ballast, and a special cable with several sensors attached (\"the sensor string\") connected to a datalogger at lower end and to a float at top end. The datalogger had a pressure sensor which gave us the exact depth of the datalogger. To know exact depth levels for the sensors mounted on cable we measured distance between the pressure sensor and every sensor on the cable (with a ruler). This measured depths was added to a text label for each sensor. So the \"Cond #241, +10.45\" label means that there was a conductivity sensor with serial number 241 sitting 10.45 m above (\"+\" sign means \"above\") the pressure sensor mounted on the datalogger.本海洋锚系观测系统的底部设置有压载重物，与该压载重物相连的锚系框架内安装有数据记录仪（datalogger）；另有一根搭载多台传感器的专用线缆（即“传感器串（sensor string）”），其下端连接至数据记录仪，上端连接至浮标。该数据记录仪搭载有压力传感器，可测得自身的精确深度。为获取线缆上各安装传感器的准确深度值，我们使用直尺测量了压力传感器与线缆上每台传感器之间的距离，并将该测量得到的相对距离添加至每台传感器的文本标签中。因此，标签格式为"Cond #241, +10.45"的含义为：该电导率传感器（conductivity sensor）的序列号为241，其安装位置相较于搭载于数据记录仪上的压力传感器高出10.45米（"+"号表示"高于"）。