ISSC 2022 Committee III.1-Ultimate Strength Benchmark Data

Overview This page provides a zip file for a benchmark study by the 21st International Ship and Offshore Structures Congress (ISSC) Committee III.1-Ultimate Strength. The files include test details, drawings, material data, geospatial measurements, and results for ultimate strength tests on a newly built grillage, ATC-1 that have been generated by Naval Surface Warfare Center Carderock Division under funding from the US Navy's Office of Naval Research (ONR) Advanced Naval Platforms Division under the direction of Dr. Paul Hess. The folder “General Information” contains a detailed description of the study as well as a presentation on the experimental setup. Folder Structure General Information: Contains the study description, experimental setup, fabrication drawings Phase 1: Files distributed under Phase 1 of the study, namely a CAD model (IGES and STEP) and nominal data on the grillage properties Phase 2: Files distributed under Phase 2 of the study, namely data on measured (actual) structural properties as well as metrological data (point clouds) describing the as-constructed grillage shape Phase 3: Files distributed under Phase 1 of the study, namely precise thickness measurements, material acceptance certificates, and tensile test results Result: Load-shortening data for the ATC-1 grillage as well as test video Photos: Photos of the ATC-1 grillage at various phases in the testing cycle Release and Distribution of Data The information is approved for public release with unlimited distribution per DoDI 5230.24. Usage of this data is unlimited. Unless required by applicable law or agreed to in writing, the data is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied and the US Government shall not be held liable for its use or misuse. Support Questions regarding this data should be forwarded to either: Paul Hess, // [e-mail] Office of Naval Research Ken Nahshon // [e-mail] Naval Surface Warfare Center Carderock Division概述 本页面提供第21届国际船舶与近海结构大会（International Ship and Offshore Structures Congress, ISSC）第III.1委员会——极限强度委员会的基准研究压缩包文件。该数据集包含由美国海军研究办公室（Office of Naval Research, ONR）先进海军平台分部资助、海军水面作战中心卡德洛克分部在保罗·赫斯博士指导下，针对新建格栅结构ATC-1开展的极限强度试验的试验细节、图纸、材料数据、地理空间测量结果与试验成果。 "General Information（通用信息）"文件夹内含该研究的详细说明以及试验装置演示文稿。 文件夹结构 General Information（通用信息）：包含研究说明、试验装置说明与加工图纸 Phase 1（第一阶段）：本研究第一阶段分发文件，即格栅结构属性的CAD模型（IGES与STEP格式）与标称数据 Phase 2（第二阶段）：本研究第二阶段分发文件，即实测（实际）结构属性数据，以及描述竣工后格栅结构外形的计量数据（点云文件） Phase 3（第三阶段）：本研究第一阶段分发的文件，具体为精确厚度测量数据、材料验收证书与拉伸试验结果 Result（试验结果）：包含ATC-1格栅结构的载荷-缩短量数据与试验录像 Photos（试验照片）：包含ATC-1格栅结构在试验周期各阶段的实拍照片 数据发布与分发 本信息已按照美国国防部指令DoDI 5230.24要求获批公开发布，可无限制分发。数据使用无任何限制。除非适用法律要求或书面约定，本数据按“现状”基础提供，不附带任何明示或暗示的担保与条件，美国政府不对数据的使用或误用承担任何责任。 技术支持 有关本数据集的疑问请联系以下人员： 保罗·赫斯（Paul Hess） // [e-mail] 美国海军研究办公室 肯·纳雄（Ken Nahshon） // [e-mail] 海军水面作战中心卡德洛克分部