用于印度尼西亚街道的路灯的EEI分析数据

不同的场景下对灯具有着不一样的照明需求，例如对灯具能效等级的要求。通过采集用于印度尼西亚街道的路灯的输入电压、电流、光通量和功率因子等参数测算得到EEI，从而确定灯具的能效等级，就可以明确灯具在印度尼西亚的街道的照明需求，可以为厂商优化灯具设计方案提供数据支撑，提高灯具的节能性能和使用寿命。1.数据来源:在灯具出厂前，随机抽取用于印度尼西亚街道的路灯成品,采集该路灯输入电压、电流、光通量和功率因子等参数。 2.数据处理(1)基于采集的参数对灯具进行能效等级EEI分析: EEI=IV*PF/Pref;其中PF是功率修正因子:Pref是灯的参考功率，Фuse为灯的有效光通量。当中Фuse<1300lm时:Pref=фuse的平方根乘以0.88的积再加上0.049 Фuse ；当Фuse≥1300lm时:Pref =0.07341Фuse (2)若EEI≤0.11，为A++级；0.11≤EEI≤0.17，为A+级；0.17≤EEI≤0.24，为A级;0.24≤EEI≤0.6，为B级:0.6≤EEI≤0.8，为C级；0.8≤EEI≤0.95，为D级;EEI>0.95，为E级。3.数据应用:能效指数是评估灯具能效的重要指标之一，灯具出厂前进行等效分析，以适配印度尼西亚街道照明应用场景下的照明需求;同时也可为厂商优化灯具设计方案提供数据支撑，提高灯具的节能性能和使用寿命。

Lighting requirements for luminaires vary across different scenarios, including requirements for luminaire energy efficiency grades. By collecting parameters such as input voltage, current, luminous flux and power factor of street lamps intended for Indonesian streets and calculating the Energy Efficiency Index (EEI) to determine the luminaire's energy efficiency grade, we can clarify the lighting needs of these luminaires for Indonesian street applications, providing data support for manufacturers to optimize luminaire design schemes and improving the energy-saving performance and service life of the luminaires.
1. Data Source: Before the luminaires leave the factory, finished street lamps intended for Indonesian streets are randomly sampled, and parameters including their input voltage, current, luminous flux and power factor are collected.
2. Data Processing
(1) Energy efficiency grade EEI analysis of luminaires based on collected parameters: EEI = IV × PF / Pref; where PF is the power correction factor, Pref is the reference power of the luminaire, and Ф_use is the effective luminous flux of the luminaire. When Ф_use < 1300 lm: Pref = 0.88 × √Ф_use + 0.049 × Ф_use; When Ф_use ≥ 1300 lm: Pref = 0.07341 × Ф_use.
(2) Energy efficiency grade classification: If EEI ≤ 0.11, the grade is A++; If 0.11 ≤ EEI ≤ 0.17, the grade is A+; If 0.17 ≤ EEI ≤ 0.24, the grade is A; If 0.24 ≤ EEI ≤ 0.6, the grade is B; If 0.6 ≤ EEI ≤ 0.8, the grade is C; If 0.8 ≤ EEI ≤ 0.95, the grade is D; If EEI > 0.95, the grade is E.
3. Data Application: The energy efficiency index is one of the important indicators for evaluating luminaire energy efficiency. Conducting EEI analysis before the luminaires leave the factory can meet the lighting requirements of Indonesian street lighting application scenarios, while also providing data support for manufacturers to optimize luminaire design schemes and improving the energy-saving performance and service life of the luminaires.

搜集汇总

数据集介绍

特点

该数据集包含503条印度尼西亚街道路灯的能效分析数据，涵盖电压、电流、光通量等参数，用于计算能效指数（EEI）和能效等级，以优化灯具设计并满足当地照明需求。