Biodesulfurization - Effect of biomass concentration and sulfide loading rate on polysulfides. biodesulfurization_polysulfides_H2Sloadingrate_biomass

Removal of hydrogen sulfide (H2S) can be achieved using the sustainable biological desulfurization process, where H2S is converted to elemental sulfur using sulfide-oxidizing bacteria (SOB). A dual-bioreactor process was recently developed where an anaerobic (sulfidic) bioreactor was used between the absorber column and micro-oxic bioreactor. In the absorber column and sulfidic bioreactor, polysulfides (Sx2-) are formed due to the chemical equilibrium between H2S and sulfur (S8). Sx2- are thought to be the intermediate for SOB to produce sulfur from H2S oxidation. In this study, we quantify Sx2-, determine their chain length distribution under high H2S loading rates, and elucidate the relationship between biomass and the observed biological removal of sulfides under anaerobic conditions. A linear relationship was observed between Sx2- concentration and H2S loading rates at a constant biomass concentration. Increasing biomass concentrations resulted in a lower measured Sx2- concentration at similar H2S loading rates in the sulfidic bioreactor. Sx2- of chain length 6 (S62-) showed a substantial decrease at higher biomass concentrations. Identifying Sx2- concentrations and their chain lengths as a function of biomass concentration and sulfide loading rate is key in understanding and controlling sulfide uptake by the SOB. This knowledge will contribute to a better understanding of how to reach and maintain a high selectivity for S8 formation in the dual-reactor biological desulfurization process. Temporal changes of the microbial community was followed. For this, sequencing of 16S rRNA gene amplicons using primers 515F and 926R on Illumina Miseq (190 and 200 bp for forward and reverse reads) was performed. The resulting raw sequence data have been deposited in this project.