ENDAQ Vibrational Tool Data

Vibrational data from a Lathe's facing process using broken, new, and worn tools. Data was collected using an S3-D16 ENDAQ with a ±16g accelerometer range that was attached to the tools mount of a lathe. Each test was conducted with a 2.5" piece of 6061-T6 Aluminum round stock at 610 rpm removing approximately 0.005" of material each pass. The dataset consists of a total of 110 samples (50 for the new tool, 30 for the worn tool, and 30 for the broken tool) along with three excel sheets that tells the time that the bit makes contact with the material.

本数据集收录了车床 facing 加工过程中，采用破损、全新及磨损刀具所获得的振动数据。数据采集采用 S3-D16 ENDAQ 设备，该设备配备 ±16g 范围的加速度计，并将其固定于车床刀具安装处。每项测试均使用 2.5 英寸的 6061-T6 铝合金圆棒，转速为 610 rpm，每次行程去除约 0.005 英寸的材料。数据集共包含 110 个样本（其中新刀具 50 个，磨损刀具 30 个，破损刀具 30 个），并附有三张 Excel 工作表，详细记录了刀具与材料接触的时间。