NCC NorCPM1 model output prepared for CMIP6 DCPP

Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets: These data include all datasets published for 'CMIP6.DCPP.NCC.NorCPM1' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'.

The Norwegian Climate Prediction Model version 1 climate model, released in 2019, includes the following components:
aerosol: OsloAero4.1 (same grid as atmos), atmos: CAM-OSLO4.1 (2 degree resolution; 144 x 96 longitude/latitude; 26 levels; top level ~2 hPa), atmosChem: OsloChemSimp4.1 (same grid as atmos), land: CLM4 (same grid as atmos), ocean: MICOM1.1 (1 degree resolution; 320 x 384 longitude/latitude; 53 levels; top grid cell 0-2.5 m [native model uses hybrid density and generic upper-layer coordinate interpolated to z-level for contributed data]), ocnBgchem: HAMOCC5.1 (same grid as ocean), seaIce: CICE4 (same grid as ocean).
The model was run by the NorESM Climate modeling Consortium consisting of CICERO (Center for International Climate and Environmental Research, Oslo 0349), MET-Norway (Norwegian Meteorological Institute, Oslo 0313), NERSC (Nansen Environmental and Remote Sensing Center, Bergen 5006), NILU (Norwegian Institute for Air Research, Kjeller 2027), UiB (University of Bergen, Bergen 5007), UiO (University of Oslo, Oslo 0313) and UNI (Uni Research, Bergen 5008), Norway. Mailing address: NCC, c/o MET-Norway, Henrik Mohns plass 1, Oslo 0313, Norway (NCC) in native nominal resolutions: aerosol: 250 km, atmos: 250 km, atmosChem: 250 km, land: 250 km, ocean: 100 km, ocnBgchem: 100 km, seaIce: 100 km.

Project: These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6).

CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ).

The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. - Project website: https://pcmdi.llnl.gov/CMIP6.

耦合模型互比较项目第六阶段（Coupled Model Intercomparison Project Phase 6，CMIP6）数据集：本数据集涵盖了针对'CMIP6.DCPP.NCC.NorCPM1'发布的全部数据集，其完整数据引用语法遵循模板：'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'。

2019年发布的挪威气候预测模型第1版（Norwegian Climate Prediction Model version 1，NorCPM1）包含以下组成部分：
气溶胶模块：OsloAero4.1（与大气模块网格一致）；大气模块：CAM-OSLO4.1，分辨率为2度，包含144×96个经纬度格点，共26层，顶层气压约2百帕；大气化学模块：OsloChemSimp4.1（与大气模块网格一致）；陆面模块：CLM4（与大气模块网格一致）；海洋模块：MICOM1.1，分辨率为1度，包含320×384个经纬度格点，共53层，顶层网格单元深度范围为0~2.5米（原生模型采用混合密度坐标，且为提交的数据将上层通用坐标插值至z坐标）；海洋生物地球化学模块：HAMOCC5.1（与海洋模块网格一致）；海冰模块：CICE4（与海洋模块网格一致）。

本模型由挪威地球系统模式（NorESM）气候建模联盟开发运营，该联盟由挪威多家科研机构组成：国际气候与环境研究中心（CICERO，奥斯陆0349）、挪威气象局（MET-Norway，奥斯陆0313）、南森环境与遥感中心（NERSC，卑尔根5006）、挪威空气研究所（NILU，谢勒2027）、卑尔根大学（UiB，卑尔根5007）、奥斯陆大学（UiO，奥斯陆0313）以及联合研究中心（UNI，卑尔根5008），均位于挪威。通讯地址：挪威气候中心（NCC），转交挪威气象局，Henrik Mohns plass 1，奥斯陆0313，挪威（NCC）。其原生标称分辨率如下：气溶胶模块250千米，大气模块250千米，大气化学模块250千米，陆面模块250千米，海洋模块100千米，海洋生物地球化学模块100千米，海冰模块100千米。

项目背景：本数据集作为国际协调的耦合模型互比较项目第六阶段（CMIP6，详见《地球模式开发》特刊：http://www.geosci-model-dev.net/special_issue590.html）的产出成果之一，其模拟数据可为解答核心科学问题的气候研究提供支撑，同时也是政府间气候变化专门委员会（Intergovernmental Panel on Climate Change，IPCC）第六次评估报告（IPCC-AR6）作者团队的核心参考资源。

CMIP6由耦合建模工作组（Working Group on Coupled Modelling，WGCM）统筹协调，隶属于世界气候研究计划（World Climate Research Programme，WCRP）。第六阶段继承了此前由气候模型诊断与互比较计划（Program for Climate Model Diagnosis and Intercomparison，PCMDI）主导开展的多轮项目成果，并依托地球系统网格联盟（Earth System Grid Federation，ESGF）、环境数据分析中心（Centre for Environmental Data Analysis，CEDA）及众多相关配套活动完成项目落地。原始数据存储于分布式数据节点集群并实现部分镜像，IPCC所依赖的多数数据目前正由德国气候计算中心（German Climate Computing Center，DKRZ）托管的IPCC数据分发中心（IPCC Data Distribution Centre，IPCC DDC）进行长期归档保存。

该项目汇聚了全球约120个全球气候模式的模拟数据，合作机构共计约45家。项目官方网站：https://pcmdi.llnl.gov/CMIP6。

搜集汇总

背景与挑战

背景概述

该数据集是CMIP6项目的一部分，由NorCPM1气候模型生成，包含多组件气候模拟数据，分辨率为100-250公里，用于支持全球气候研究和IPCC-AR6报告。数据集采用CC BY 4.0许可，由挪威多个研究机构联合开发。