Design and implementation of high-speed Additive manufacturing system using pagewide diode laser module

NIAID Data Ecosystem2026-03-13 收录

增材制造材料

激光打印机

数据链接：

https://data.mendeley.com/datasets/rp8xbgdykj 数据链接链接失效反馈

官方服务：

资源简介：

Tensile test of PA 12 printed sample by page wide diode laser printer

创建时间：

2021-10-10

Small punch creep test data for AISI 316L ar material at 600 °C and a load of 400 N (specimen identifier FK-03)

材料蠕变测试

增材制造材料

Data created at JRC, Netherlands during the Horizon 2020 NUCOBAM project aiming to develop the qualification process and evaluate the in-service behaviour of AM materials, allowing the use of additive

DataCite Commons2024-10-31 更新50

Precipitate Size in GRCop-84 Gas Atomized Powder and Laser Powder Bed Fusion Additively Manufactured Material

增材制造材料

合金性能

Data for: Precipitate Size in GRCop-84 Gas Atomized Powder and Laser Powder Bed Fusion Additively Manufactured Material

NIAID Data Ecosystem40

Preparation and mechanical property of Al2O3/SiC composite material lattice structure by laser powder bed fusion

增材制造材料

轻量化设计

In order to meet the urgent requirement of hypersonic vehicles for higher strength and ultra-lightweight, the Al2O3/SiC composite materials lattice structures and bending specimens with different prin

科学数据银行2025-07-01 更新20

Mechanical properties and characterisation data for specimens produced by fused deposition modelling from layered double hydroxide filled poly (lactic acid)

增材制造材料

熔融沉积建模优化

The additive fraction as well as material extrusion, that is fused deposition modelling (FDM), parameters where optimised in a statistical designed experiment. Tensile and impact properties were inves

DataCite Commons2024-08-19 更新40

Small punch creep test data for AISI 316L ar material at 650 °C and a load of 300 N (specimen identifier FI-12)

核材料蠕变性能

增材制造材料

DataCite Commons2024-11-05 更新30