Madrid Grid Area Buildings + Reachable Endpoints for Given RF Transmitter Location and Parameters, with and without RISs Installation.

1- The obstacles_save folder contains arrays defining the vertices locations (x,y) of buildings in the considered area in Madrid Grid. A transmitter is placed at the center of a square at location [600, 900]. Possible receiver (or relay trasnceivers) locations are defined as the vertices (i.e., corners) of buildings (from previous list). The goal of the simulation is to find how many hops are needed to reach, if possible, each location from the previously mentioned list of vertices, assuming a maximum allowed path loss value of 90 dB between any two consecutive hops. 2- The arrays in no_ris specify the vertices reachable within N sucessive hops, when no RIS is installed in the area. 3- Similarly, the arrays in double_ris give the coordinates of vertices reachable with N hops when a two RISs are installed in the middle square(as shown in related paper). The RIS beamforming gain is 20 dB (in Table 1 in the paper the gain should be 20 not 15 dB).