NSW Cadastre History Service

Export DataAccess APINSW Cadastre History Service\n\nMetadata Portal Metadata InformationContent TitleNSW Cadastre History ServiceContent TypeHosted Feature LayerDescriptionThe NSW Cadastre web service is a dynamic map of cadastral features extracted from the Land Parcel and Property theme of the NSW Foundation Spatial Data Framework (FSDF).Spatial datasets collected with time information can show what happened at a specific time, or what may happen in the future. By animating time-based data, it can be visualised at each step, highlighting patterns or trends emerging over time.Spatial Collaboration Portal map layers that are time enabled include different information for the same location at different times.When a dataset contains time enabled layers, it is “time aware”, and can be configured to display the data during a specific period or to animate the data over a selected time. Time animation can be enabled in the map viewer using the time slider tool.Features included in the NSW Cadastre History ServiceLot - Depicts a parcel of land created on a survey plan. Each lot may be represented by standard lots, standard part lots, strata or stratum. Each lot has a lot number, section number, plan lot area, plan number, plan label, ITS title status, and stratum label. Road - Represents dedicated public roads which are open ways for the passage of vehicles, persons or animals on land. The road dataset includes public roads in use. Each road type has a section number, plan number, plan label, ITS title status, road type, road width or Crown/Council width, lot number, and stratum label.Unidentified - Represents a parcel of land that cannot be identified. Crown land, vested, dedicated and severed land may be included in this category as well as Old System lots for which lot/DP identification cannot be found. This dataset also identifies the locations of 100ft wide reserves, ACT regions, closed roads, crossings, surveyed areas, and un-surveyed areas. Water Feature - Represents tidal, non-tidal and ocean waters which form a cadastral boundary.The NSW Cadastre History Service can be used for resource management, environmental management, land use planning, agriculture management, emergency management and recreational purposes. This service can be used to aggregate information for analytical purposes. When used in combination with geocoded address data, imagery, demographic information and agency specific business information, cadastral boundary data underpins the ability to perform high quality spatial analysis.How to use the animated time featureOpen the “Map Viewer”.Select the time enabled feature layer from the contents.Select the “Configure” button (the icon to the bottom right that looks like two slider controls) to open time settings.Select “Show Advanced Settings”Choose your desired playback speedChoose a time and date for “Start Time” and “End Time”. Note. Spatial Services digital data range is 2006 through to present so data is unavailable outside this windowChoose an appropriate length of one time intervalRecommended: “Count: 1” and “Units: Year”.Select “OK” to return to the Map Window.Select the “Play” button which is the small arrow/triangle pointing right which is to the left of the slider.Note: this data is not viewable at all scales, zoom to 1km or betterInitial Publication Date09/03/2021Data Currency01/01/3000Data Update FrequencyOtherContent SourceData provider filesFile TypeESRI File Geodatabase (*.gdb)Attribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.auData Theme, Classification or Relationship to other DatasetsNSW Property and Land Parcels Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoing.Spatial Reference System (dataset)GDA94Spatial Reference System (web service)EPSG:3857WGS84 Equivalent ToGDA94Spatial ExtentFull StateContent LineageFor additional information, please contact us via the Spatial Services Customer HubData ClassificationUnclassifiedData Access PolicyOpenData QualityFor additional information, please contact us via the Spatial Services Customer HubTerms and ConditionsCreative CommonsStandard and SpecificationOpen Geospatial Consortium (OGC) implemented and compatible for consumption by common GIS platforms. Available as either cache or non-cache, depending on client use or requirement.  Data CustodianDCS Spatial Services346 Panorama AveBathurst NSW 2795Point of ContactPlease contact us via the Spatial Services Customer HubData AggregatorDCS Spatial Services346 Panorama AveBathurst NSW 2795Data DistributorDCS Spatial Services346 Panorama AveBathurst NSW 2795Additional Supporting InformationData DictionariesTRIM Number\ni

导出DataAccess APINSW地籍历史服务

## 元数据门户 元数据信息
### 内容标题：新南威尔士州（New South Wales, NSW）地籍历史服务
### 内容类型：托管要素图层（Hosted Feature Layer）
### 描述：NSW地籍网络服务为动态地籍要素地图，其数据源自新南威尔士州基础空间数据框架（Foundation Spatial Data Framework, FSDF）的土地宗地与产权专题。
带有时间属性的空间数据集可展示特定时间节点发生的事件，或推演未来可能出现的场景。通过对时序数据进行动态可视化，可逐阶段呈现数据变化，凸显随时间演变的模式与趋势。
支持时序功能的空间协作门户地图图层，可在不同时间节点展示同一地理位置的差异化信息。若数据集包含时序图层，则该数据集具备“时序感知”能力，可配置为在特定时间段内展示数据，或按选定时间范围动态播放数据。用户可通过地图查看器（Map Viewer）中的时间滑块工具启用时序动画功能。

### NSW地籍历史服务包含的要素类型：
1. **宗地（Lot）**：描绘基于测量规划生成的土地地块。宗地可分为标准宗地、标准分宗地、分层地块（strata）或stratum。每宗地包含宗地编号、区段编号、规划宗地面积、规划编号、规划标识、土地权属状态（ITS title status）以及分层地块标识（stratum label）。
2. **道路（Road）**：代表专供车辆、人员或牲畜通行的公共道路，数据集涵盖在用公共道路。每条道路包含区段编号、规划编号、规划标识、土地权属状态（ITS title status）、道路类型、道路宽度或王室/市政管控宽度、宗地编号以及分层地块标识（stratum label）。
3. **未识别地块（Unidentified）**：代表无法识别的土地地块。该类别可涵盖王室土地、已授产土地、专用土地及分割土地，同时包含无法获取宗地/DP编号的旧系统宗地。本数据集还可识别100英尺宽保护区、澳大利亚首都领地（Australian Capital Territory, ACT）区域、封闭道路、道口、已测量区域及未测量区域的位置。
4. **水体要素（Water Feature）**：代表构成地籍边界的潮汐水域、非潮汐水域及海洋水域。

NSW地籍历史服务可应用于资源管理、环境管理、土地利用规划、农业管理、应急管理及休闲娱乐场景。该服务可聚合信息以支撑分析工作，若与地理编码地址数据、影像数据、人口统计信息及机构专属业务数据结合使用，地籍边界数据将为高质量空间分析提供核心支撑。

### 时序动画功能使用指南
1. 打开“地图查看器（Map Viewer）”。
2. 从内容列表中选择支持时序的要素图层。
3. 点击“配置”按钮（右下角形似两个滑块控件的图标）以打开时序设置面板。
4. 选择“显示高级设置”。
5. 选择所需的播放速度。
6. 为“开始时间”与“结束时间”选择对应的时间与日期。*注意：空间服务的数字数据覆盖范围为2006年至今，超出该时间窗口的数据不可用。*
7. 选择合适的时间间隔长度，推荐设置为“数量：1”且“单位：年”。
8. 点击“确定”返回地图窗口。
9. 点击位于滑块左侧的向右小箭头/三角形形状的“播放”按钮。
*注意：本数据并非在所有比例尺下均可查看，请缩放至1公里或更优比例尺。*

### 首次发布日期：2021年3月9日（09/03/2021）
### 数据时效性：3000年1月1日（01/01/3000）
### 数据更新频率：其他
### 数据来源：数据提供方文件
### 文件类型：ESRI文件地理数据库（ESRI File Geodatabase, *.gdb）
### 署名：© 新南威尔士州政府（空间服务部，新南威尔士州客户服务厅业务单元）。最新信息请访问 spatial.nsw.gov.au
### 数据专题、分类或与其他数据集的关联关系：基础空间数据框架（FSDF）的新南威尔士州产权与土地宗地专题
### 精度：本数据集与宗地及产权数字数据集保持位置关联与对齐。本数据集通过数字化现有最佳地籍测绘成果获取，比例尺与精度范围覆盖1:500至1:250000，符合澳大利亚国家测绘委员会《地图精度标准（1975）》。因此，90%的明确定位点的要素实例位置在对应地图比例尺下误差不超过0.5毫米，即：1:500比例尺对应0.25米、1:2000比例尺对应1米、1:4000比例尺对应2米、1:25000比例尺对应12.5米、1:50000比例尺对应25米、1:100000比例尺对应50米。当前正持续推进项目以升级数据的空间位置与精度。
### 数据集空间参考系统：GDA94
### 网络服务空间参考系统：EPSG:3857
### 与WGS84等效：GDA94
### 空间范围：全州范围
### 数据谱系：如需更多信息，请通过空间服务客户中心联系我们
### 数据分类：非保密
### 数据访问政策：开放
### 数据质量：如需更多信息，请通过空间服务客户中心联系我们
### 条款与条件：知识共享（Creative Commons）标准协议
### 标准与规范：遵循开放地理空间联盟（Open Geospatial Consortium, OGC）标准，可兼容通用GIS平台使用。根据客户端使用场景或需求，可提供缓存或非缓存两种服务形式。
### 数据保管方：DCS空间服务部，地址：346 Panorama Avenue, Bathurst NSW 2795
### 联系人：如需联系，请通过空间服务客户中心
### 数据聚合方：DCS空间服务部，地址：346 Panorama Avenue, Bathurst NSW 2795
### 数据分发方：DCS空间服务部，地址：346 Panorama Avenue, Bathurst NSW 2795
### 附加支持信息：数据字典：TRIM编号