X-ray CT scan data of pultruded carbon fiber composite - sample C

A X-ray computed tomography scan of a unidirectional composite sample (sample C) cut from a carbon fiber reinforced pultruded profile. The X-ray scan was performed at DanMAX beamline, at MAX IV synchotron facility. The file format is H5. For the material chatacterization of the composite and its constituents (fiber and matrix), a journal publication is prepared. For the analysis of the X-ray data, including the extraction of the fiber orientation, and the material characterization data, analysis and post-processing, please visit: https://doi.org/10.5281/zenodo.17455079 This dataset has been used in the following publications: Mageira, P.; Poulios, K.; Andreasen, J.W.; Dahl, V.A.; Mikkelsen, L.P. Experimental and Numerical Compression Analysis of 3D X-Ray CT Scanned Uni-directional Pultruded Carbon Fiber Composites. In ICCM International Conferences on Composite Materials, Baltimore, MD, United States, 4 August 2025. Mageira, P.; Poulios, K.; Andreasen, J.W.; Dahl, V.A.; Mikkelsen, L.P. From 3D X-ray CT scans to mesh-independent numerical compressive strength predictions of unidirectional carbon fiber composites. IOP Conf. Ser. Mater. Sci. Eng. 2025, 1338. doi: 10.1088/1757-899x/1338/1/012026. This study was funded by EU Horizon MSCA 2021 DN Reliance: REaL-tIme characterization of ANisotropic Carbon-based tEchnological fibers, films and composites, grant no. 101073040. We acknowledge the MAX IV Laboratory for beamtime on the DanMAX beamline under proposal 20231612. Research conducted at MAX IV, a Swedish national user facility, is supported by Vetenskapsrådet (Swedish Research Council, VR) under contract 2018-07152, Vinnova (Swedish Governmental Agency for Innovation Systems) under contract 2018-04969 and Formas under contract 2019-02496. DanMAX is funded by the NUFI grant no. 4059-00009B.