NSW Land Parcel and Property Theme - NSW Cadastre

NSW Land Parcel Property Theme - NSW Cadastre ServicePlease NoteWGS 84 service aligned to GDA94This dataset has spatial reference [WGS 84 ≈ GDA94] which may result in misalignments when viewed in GDA2020 environments. A similar service with a ‘multiCRS’ suffix is available which can support GDA2020, GDA94 and WGS 84 ≈ GDA2020 environments.In due course, and allowing time for user feedback and testing, it is intended that the original service name will adopt the new 'multiCRS' functionality.Metadata Portal Metadata InformationContent TitleNSW Land Parcel Property Theme - NSW Cadastre ServiceContent TypeHosted Feature LayerDescriptionNSW Cadastre web service is a dynamic map of cadastral features extracted from the Land and Property theme of the NSW Foundation Spatial Data Framework (FSDF). It provides access to a state wide integrated database and a component of the foundation spatial datasets within the New South Wales. A ‘cadastre’ is an official register of property showing boundaries. The Land Parcel theme contains current land titles only.Lot: Depicts a parcel of land created on a survey plan. Each lot may be represented by standard lots, standard part lots, strata or stratum. Each lot has a lot number, section number, plan lot area, plan number, plan label, ITS title status, and stratum label. Road: Represents dedicated public roads which are open ways for the passage of vehicles, persons or animals on land. The road dataset includes public roads in use. Each road type has a section number, plan number, plan label, ITS title status, road type, road width or Crown/Council width, lot number, and stratum label.Unidentified: Represents a parcel of land that cannot be identified. Crown land, vested, dedicated and severed land may be included in this category as well as Old System lots for which lot/DP identification cannot be found. This dataset also identifies the locations of 100ft wide reserves, ACT regions, closed roads, crossings, surveyed areas, and un-surveyed areas. Water Feature: Represents tidal, non-tidal and ocean waters which form a cadastral boundaryThe NSW Cadastral web service can be used for resource management, environmental management, land use planning, agriculture management, emergency management and recreational purposes. This service can be used to aggregate information for analytical purposes. Cadastral boundary data in combination with geocoded address data, imagery, demographic information and agency specific business information underpins the ability to perform high quality spatial analysis.Initial Publication Date31/07/2019Data Currency01/01/3000Data Update FrequencyOtherContent SourceData provider filesFile TypeESRI File Geodatabase (*.gdb)Attribution© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.au.Data Theme, Classification or Relationship to other DatasetsNSW Property and Land Parcels Theme of the Foundation Spatial Data Framework (FSDF)AccuracyThe dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoing.Spatial Reference System (dataset)GDA94Spatial Reference System (web service)EPSG:3857WGS84 Equivalent ToGDA94Spatial ExtentFull StateContent LineageFor additional information, please contact us via the Spatial Services Customer HubData ClassificationUnclassifiedData Access PolicyOpenData QualityFor additional information, please contact us via the Spatial Services Customer HubTerms and ConditionsCreative CommonsStandard and SpecificationOpen Geospatial Consortium (OGC) implemented and compatible for consumption by common GIS platforms. Available as either cache or non-cache, depending on client use or requirement.Data CustodianDCS Spatial Services346 Panorama AveBathurst NSW 2795Point of ContactPlease contact us via the Spatial Services Customer HubData AggregatorDCS Spatial Services346 Panorama AveBathurst NSW 2795Data DistributorDCS Spatial Services346 Panorama AveBathurst NSW 2795Additional Supporting InformationData DictionariesTRIM Number

新南威尔士州土地宗地房产主题——新南威尔士州地籍服务（NSW Cadastre Service）

请注意：本服务采用与澳大利亚大地基准1994（GDA94）对齐的世界大地测量系统1984（WGS 84）。本数据集的空间参考为[WGS 84 ≈ GDA94]，在澳大利亚大地基准2020（GDA2020）环境中查看时可能出现对齐偏差。另有带“multiCRS”后缀的同类服务，可支持GDA2020、GDA94及WGS 84 ≈ GDA2020环境。待完成用户反馈收集与测试后，本原始服务将逐步升级为具备“multiCRS”功能的新版本。

元数据门户元数据信息
内容标题：新南威尔士州土地宗地房产主题——新南威尔士州地籍服务（NSW Cadastre Service）
内容类型：托管要素图层（Hosted Feature Layer）
数据集描述：新南威尔士州地籍（cadastre）Web服务是从新南威尔士州基础空间数据框架（Foundation Spatial Data Framework, FSDF）的土地与房产主题中提取的地籍要素动态地图。该服务可访问全州集成数据库，是新南威尔士州基础空间数据集的组成部分。“地籍（cadastre）”指记载宗地边界的官方房产登记簿。
本土地宗地主题仅包含当前有效的土地权属信息。

宗地（Lot）：描绘经测量规划方案生成的土地宗地。宗地类型包括标准宗地、标准部分宗地、分层宗地（strata/stratum）。每宗地均包含宗地编号、区段编号、规划宗地面积、规划编号、规划标识、ITS权属状态（ITS title status）及分层标识。

道路（Road）：代表专供车辆、行人或牲畜通行的公共道路。本道路数据集包含在用公共道路。每条道路均包含区段编号、规划编号、规划标识、ITS权属状态、道路类型、道路宽度或州定/市政宽度、宗地编号及分层标识。

未识别宗地（Unidentified）：代表无法识别的土地宗地。本类别包含王室土地、已授予土地、已划拨土地及已分割土地，同时包含无法获取宗地编号/规划编号的旧系统宗地。本数据集同时标注100英尺宽预留地、澳大利亚首都领地（Australian Capital Territory, ACT）区域、已封闭道路、道口、测量区域及未测量区域的位置。

水体要素（Water Feature）：代表构成地籍边界的潮汐水域、非潮汐水域及海洋水域。

新南威尔士州地籍Web服务可应用于资源管理、环境管理、土地利用规划、农业管理、应急管理及休闲娱乐用途。该服务可用于聚合信息以开展分析工作。地籍边界数据结合地理编码地址数据、影像资料、人口统计信息及机构专属业务信息，可为开展高质量空间分析提供支撑。

初始发布日期：2019年7月31日
数据现势性：3000年1月1日
数据更新频率：其他
内容来源：数据提供方文件
文件类型：ESRI文件地理数据库（ESRI File Geodatabase, *.gdb）
署名声明：© 新南威尔士州政府（空间服务部，新南威尔士州客户服务厅下属业务单元）。最新信息请访问 spatial.nsw.gov.au。

数据主题、分类或与其他数据集的关联关系：新南威尔士州房产与土地宗地主题——基础空间数据框架（Foundation Spatial Data Framework, FSDF）的组成部分

精度：本数据集与宗地及房产数字数据集保持空间位置关联与对齐。本数据集通过数字化现有最佳地籍测绘成果生成，测绘比例尺与精度范围遵循澳大利亚国家测绘委员会1975年《地图精度标准》，覆盖1:500至1:250 000。因此，90%的明确特征点的位置误差在对应比例尺下的0.5毫米范围内，即：1:500比例尺对应0.25米，1:2000比例尺对应1米，1:4000比例尺对应2米，1:25000比例尺对应12.5米，1:50000比例尺对应25米，1:100000比例尺对应50米。目前本数据集的空间位置与精度升级工作正在持续推进中。

空间参考系统（数据集）：GDA94
空间参考系统（Web服务）：EPSG:3857
等效WGS84基准：GDA94
空间范围：全州范围
数据谱系：如需更多信息，请通过空间服务客户中心联系我们
数据分类：非保密
数据访问政策：开放
数据质量：如需更多信息，请通过空间服务客户中心联系我们
条款与条件：知识共享（Creative Commons）标准规范；开放地理空间联盟（Open Geospatial Consortium, OGC）兼容规范，可通过常见GIS平台调用。根据客户端使用需求，可提供缓存或非缓存服务。

数据保管方：新南威尔士州客户服务厅空间服务部（DCS Spatial Services）
地址：346 Panorama Avenue, Bathurst NSW 2795
联系人：请通过空间服务客户中心联系我们
数据汇总方：新南威尔士州客户服务厅空间服务部（DCS Spatial Services）
地址：346 Panorama Avenue, Bathurst NSW 2795
数据分发方：新南威尔士州客户服务厅空间服务部（DCS Spatial Services）
地址：346 Panorama Avenue, Bathurst NSW 2795

附加支持信息
数据字典：TRIM编号