Data for: Reexamining unconscious response priming: a liminal-prime paradigm
收藏资源简介：
Files description: There are three data files: E1_and_control_All: Experiment 1 and the control condition reported in the discussion of Experiment 1. E2_All: Experiment 2 E2_All: Experiment 3 There are three statistical analysis R files, one for each experiment, as above. Description of the fields in the data files: RELEVANT FIELDS COMMON TO E1, E2 AND E3: compatible: compatibility between the responses elicited by the target and prime (0=incompatible, 1=compatible) Consc: awareness rating: z=0, x=1, c=2, v=3 (these were the keys actually used: they were covered with stickers labeled 0 1 2 and 3) aware: awareness rating: 0,1,2 or 3 Mask1: forward mask's duration in milliseconds Mask2: backward mask's duration in milliseconds Prime_english: prime stimulus (for word primes, the actual words were in Hebrew. We replaced the Hebrew words with the English translation in the shared data file for obvious reasons) PrimeDuration: prime duration in milliseconds PrimeNum: prime value as a digit (0 = no prime, i.e., catch trial) PrimeType: word/digit/catch Trgt_english: target stimulus (for word targets, the actual words were in Hebrew. We replaced the Hebrew words with the English translation in the shared data file for obvious reasons) TrgtNum: target value as a digit TrgtType: word/digit type_compatible: compatibility of the formats (digit / word) of the prime and target (0=incompatible, 1=compatible). respac: target discrimination accuracy (0=incorrect, 1=correct) resprt: response time to the target in milliseconds Whenever the includes "practice", it indicates that those are practice trials that are not included in the analysis. RELEVANT FIELD SPECIFIC TO E1: BlockTitle: Condition of attention and relevance: (target gated = unattended irrelevant prime condition, i.e., task=aperture of frame in target display; prime gated = attended irrelevant prime condition, i.e., task=aperture of frame in prime display; prime visibility probe = attended relevant prime condition, i.e., task=prime visibility rating)
文件说明：本次数据集包含3个数据文件：E1_and_control_All对应实验1及其讨论中提及的控制条件；E2_All对应实验2；E3_All对应实验3。同时附带3个用于统计分析的R脚本文件，分别对应上述三个实验。 数据文件字段说明： ## 实验E1、E2、E3共通的有效字段 1. `compatible`：靶刺激（target）与启动刺激（prime）引发的反应兼容性（0=不兼容，1=兼容） 2. `Consc`：意识性评分，对应按键映射为z=0、x=1、c=2、v=3（实际按键贴有标注0、1、2、3的贴纸） 3. `aware`：意识性评分，取值为0、1、2或3 4. `Mask1`：前掩蔽刺激的持续时长，单位为毫秒（ms） 5. `Mask2`：后掩蔽刺激的持续时长，单位为毫秒（ms） 6. `Prime_english`：启动刺激（prime stimulus）文本，若为词语类启动刺激，原始文本为希伯来语；出于可读性考虑，本次共享数据文件已将希伯来语替换为英文译文 7. `PrimeDuration`：启动刺激的持续时长，单位为毫秒（ms） 8. `PrimeNum`：以数字形式表示的启动刺激取值（0代表无启动刺激，即捕获试次） 9. `PrimeType`：启动刺激类型，可选值为词语（word）、数字（digit）或捕获试次（catch） 10. `Trgt_english`：靶刺激（target stimulus）文本，若为词语类靶刺激，原始文本为希伯来语；出于可读性考虑，本次共享数据文件已将希伯来语替换为英文译文 11. `TrgtNum`：以数字形式表示的靶刺激取值 12. `TrgtType`：靶刺激类型，可选值为词语（word）或数字（digit） 13. `type_compatible`：启动刺激与靶刺激的格式（数字/词语）兼容性（0=不兼容，1=兼容） 14. `respac`：靶刺激辨别准确率（0=错误，1=正确） 15. `resprt`：靶刺激反应时，单位为毫秒（ms） 注：若字段包含“practice”字样，则代表该部分为练习试次，不纳入正式分析范围。 ## 仅实验E1特有的有效字段 `BlockTitle`：注意分配与刺激相关性条件，具体分为以下三类： - `target gated`：靶刺激通道为未注意的无关启动条件，即实验任务为判断靶刺激显示框的孔径大小 - `prime gated`：启动刺激通道为受注意的无关启动条件，即实验任务为判断启动刺激显示框的孔径大小 - `prime visibility probe`：启动刺激通道为受注意的相关启动条件，即实验任务为对启动刺激进行意识性评分
