John Elliot (2010) CIL:7819, Mus musculus, permanent cell line cell. CIL. Dataset

This is part of a triplicate data set of non-overlapping fields of NIH 3T3 fibroblasts cultured on polystyrene. Each set is indicated by the well number. Each image contains 4 images of each field as a time series. The first image is the phase contrast image. The second image channel is Tenascin-C promoter driven destabilized EGFP reporter vector. The third image is Texas Red C2-maleimide (to stain cell body), and the fourth image is Dapi (to stain nuclei).

Images were collected on a Zeiss Axiovert 100. The samples were viewed with a Zeiss A-plan 10x Ph1 0.25 NA objective and recorded with a CoolSnapFX camera using 2 x 2 binning. The filters were as follows: 1.) A custom dichroic multipass beam splitter optimized for imaging DAPI, EGFP and TxRed (part# BS51019+400dclp, Chroma Technology, VT); 2.) DAPI excitation filter-360/40 nm; 3.) DAPI emission filter-460/50 nm; 4.) EGFP excitation filter-470/40 nm; 5.) EGFP emission filter-525/50 nm; 6.) TxRed excitation filter-568/24 nm; 7.) TxRed emission filter-630/60 nm. Autofocus on the TxRed color channel was performed at each location before the series of images were collected.

Protocol: The cells were seeded on TCPS dishes at ~1000 cells/well during a passage cycle. The test cultures were incubated overnight before being rinsed with PBS and then fixed with 300 uM m-maleimidobenzoyl-N-hydroxysuccinimidyl ester (MBS) in microtubule stabilizing buffer (MTSB) composed of 4% (w/v) polyethylene glycol (PEG) 8000, 100 mM 1,4-piperazinediethanesulfonic acid (PIPES),10 mM ethylene glycol-bis(2-aminoethylether)-N,N,N’,N’-tetraacetic acid (EGTA), pH 6.9 for at least 16h at RT. The fixative was removed and solution of 0.05% Triton X100 in PBS containing 10 ng/mL of Tx Red C2-maleimide and 2 ng/mL DAPI for 2h. The staining solution was removed, cells were rinsed with PBS/3% BSA, and 0.05% sodium azide and PBS. A 50% glycerol/10 mM Tris, pH 8.0 containing 2ng/mL DAPI and 0.9g/l 1,4-diazobicyclo[2,2,2]octane (DABCO) as an antifade reagent was then added to each well for imaging purposes. The bottom of the wells were wiped with 70% ethanol wipe and then a dry wipe before imaging.

Purpose: The purpose of the dataset was to measure the distribution of EGFP fluorescence intensities within individual cells in the population. Using the image sets collected, a plugin for ImageJ was used to perform the following image analysis tasks. 1.) The Txred images (which is a general purpose cell body stain) were segmented by manual thresholding. 2.) The resulting mask was used to define cell ROIs on the DAPI and EGFP images. 3.) The number of nuclei in each ROI is determined from the DAPI image and the integrated intensity of the EGFP signal in the cell is determined from ROI in the EGFP image. 4.) A local background intensity around each cell in the EGFP image is determined by dilating the ROI by 3 pixels and determining the pixel intensities in only the 3 pixel dilation area. When this data is placed in a spread sheet, you can use the results to identify cell clusters (i.e. have more than 1 nuclei), debris or partial cell (i.e. no nuclei), poor EGFP/cell measurements (i.e. high background intensity). The spreadsheet can be used to measure the distribution of EGFP cell intensities within a population of cells. The phase images were collected as quality control and validation data. The phase images provide a human validation mechanism if there are questions about the staining and/or fluorescence detection in an image.

References: 1. Langenbach, K.J., Elliott, J.T., Tona, A., and Plant, A.L. (2006) Evaluating the correlation between fibroblast morphology and promoter activity on thin films of extracellular matrix proteins. BMC-Biotechnology 6(1):14. 2.Elliott, J.T., Halter, M., Woodward, J.T., Langenbach, K.J., Tona, A., Plant, A.L. (2008) Evaluating the performance of fibrillar collagen films formed at polystyrene surfaces as cell culture substrates. Biointerphases. 3(2):19-28.

本数据集为美国国立卫生研究院（NIH）3T3 成纤维细胞在聚苯乙烯培养皿上培养的非重叠区域之一。每个集合以孔号标识。每个图像包含该区域的四幅时序图像。第一幅图像为相衬图像。第二图像通道为由 Tenascin-C 启动子驱动的失稳 EGFP 报告基因载体。第三图像为 Texas Red C2-马来酰亚胺（用于染色细胞体），第四图像为 Dapi（用于染色细胞核）。图像采集于蔡司 Axiovert 100 显微镜。样品使用蔡司 A-plan 10x Ph1 0.25 NA 物镜观察，并通过 CoolSnapFX 摄像头进行 2 x 2 合并记录。使用的滤光片如下：1. 适用于成像 DAPI、EGFP 和 TxRed 的定制二向色多通路光束分离器（部件号 BS51019+400dclp，Chroma Technology，VT）；2. DAPI 激发滤光片-360/40 nm；3. DAPI 发射滤光片-460/50 nm；4. EGFP 激发滤光片-470/40 nm；5. EGFP 发射滤光片-525/50 nm；6. TxRed 激发滤光片-568/24 nm；7. TxRed 发射滤光片-630/60 nm。在收集图像系列之前，对 TxRed 颜色通道的每个位置进行了自动对焦。