CCS - CCS2 Mooring data November 2019 deployment

Project Overview: A range of solutions will be required to reach globally agreed emissions reductions targets for carbon dioxide (CO2). Carbon capture and storage (CCS) is part of the suite of technologies that will contribute to lowering atmospheric emissions of CO2 from Australia's energy system. There are a wide variety of technologies at various stages of technical and commercial readiness, with more development underway for cost effective CO2 capture and storage. Our research will provide new knowledge to inform cost-efficient measurement, monitoring and verification (MMV) of the environment of CCS projects in coastal waters.\n\n--o--\n\nDescription:\n\nMeasurements are made Seabird Seaphox (for dissolved oxygen, pH, Seawater Temperature and Salinity), mounted on a lander. The Seaphox takes a reading every hour in the UTC hour and is transmitted real time through acoustic and/or 3G modems. The Seaphox consists of a SeaFET (pH) and SBE-37-SMP-ODO CTD (SW temperature, Salinity and Dissolved Oxygen [SBE63]).\n\nRelevant component details: make, model, serial number, firmware version, settings:\nSensor | Make | Model | Serial Number | Calibration\npH, DO,T and S sensor | Seabird Seaphox | SeaFET | 1031 |2019-04, factory calibrated\npH, DO,T and S sensor | Seabird Seaphox | SBE-37-SMP-ODO | 15559 | 2019-04, factory calibrated\npH, DO,T and S sensor | Seabird Seaphox | SBE-63 | 1689 | 2019-04, factory calibrated\n\nCalibration Information (if applicable)\nSBE 37 (T, S, DO) and the SeaFET (pH) are calibrated by the factory and verified in the CSIRO laboratory. The pH reported in the files is flagged questionable for the pre-deployment calibrated data due to possible calibration changes which can occur after deployment \npH (calibrated) is further processed after the recovery using in situ bottle sample where available, using Total Alkalinity (TA) and Dissolved Inorganic Carbon (DIC), which will be converted to pH using CO2SYS, where the Lueker k1k2 dissociation constant is used. \n\nLocation: 38.2588333S 147.4220333E

项目概述：要实现全球公认的二氧化碳（CO₂）减排目标，需要采用多种解决方案。碳捕获与封存（CCS）是可用于降低澳大利亚能源系统向大气排放CO₂的技术组合之一。当前已有多种技术处于不同的技术成熟度与商业化阶段，且针对低成本CO₂捕获与封存技术的研发仍在持续推进。本研究将提供全新的认知，为近岸海域CCS项目的低成本高效测量、监测与验证（MMV）工作提供参考依据。

--o--

数据集说明：

本研究采用搭载于着陆器上的海鸟Seaphox传感器（用于检测溶解氧、pH值、海水温度与盐度）开展测量工作。该Seaphox传感器于每个UTC整点采集一次数据，并通过声学调制解调器和/或3G调制解调器实时传输数据。Seaphox传感器由SeaFET（pH检测模块）与SBE-37-SMP-ODO CTD（用于海水温度、盐度与溶解氧检测，对应型号SBE63）组成。

相关组件详情：品牌、型号、序列号、校准信息：
传感器 | 品牌 | 型号 | 序列号 | 校准信息
pH、溶解氧、温度与盐度传感器 | 海鸟Seaphox | SeaFET | 1031 | 2019年4月，原厂校准
pH、溶解氧、温度与盐度传感器 | 海鸟Seaphox | SBE-37-SMP-ODO | 15559 | 2019年4月，原厂校准
pH、溶解氧、温度与盐度传感器 | 海鸟Seaphox | SBE-63 | 1689 | 2019年4月，原厂校准

校准信息（如适用）：
SBE 37（温度、盐度、溶解氧检测模块）与SeaFET（pH检测模块）均经原厂校准，并在澳大利亚联邦科学与工业研究组织（CSIRO）实验室完成验证。由于部署后可能出现校准偏移，文件中记录的部署前校准pH数据被标记为存疑。
经校准的pH数据将在回收后，利用可获取的原位瓶采样本、总碱度（TA）与溶解无机碳（DIC）进行进一步处理，并通过CO2SYS工具结合Lueker k1k2解离常数将其转换为最终pH值。

监测点位：南纬38.2588333°，东经147.4220333°