Data batch direct download service (WFS): Technological Risk Prevention Plan — PPRT — of ANTARGAZ FINAGAZ in Gimouille — Nièvre (58)

The COVADIS data standard for risk prevention plans includes all the technical and organisational specifications for the digital storage of geographical data represented in the risk prevention plans (RPPs). The major risks consist of the eight main natural hazards foreseeable in the national territory: floods, earthquakes, volcanic eruptions, terrain movements, coastal hazards, avalanches, forest fires, cyclones and storms, and four technological risks: nuclear risk, industrial risk, risk of transport of hazardous materials and risk of dam failure. The Risk Prevention Plans (PPR) were established by the Act of 2 February 1995 on strengthening the protection of the environment. The PPR tool is part of the Law of 22 July 1987 on the organisation of civil security, the protection of the forest against fire and the prevention of major risks. The development of a RPP is the responsibility of the State. It is decided by the Prefect. Whether natural, technological or multi-hazard, risk prevention plans have similarities. They contain three categories of information: • Regulatory mapping translates into a geographical delimitation of the territory concerned by the risk. This delimitation defines areas in which specific regulations apply. These regulations are easement and impose requirements varying according to the hazard level to which the area is exposed. The areas are represented on a zoning plan that fully covers the study area. • The hazards at the origin of the risk are contained in hazard documents which may be inserted in the presentation report or annexed to the RPP. These documents are used to map the different intensity levels of each hazard considered in the risk prevention plan. • The issues identified during the preparation of the RPP can also be annexed to the approved document in the form of maps. These similarities between the different types of PPR and the desire to achieve a good level of standardisation of PPR data have led COVADIS to opt for a single data standard, sufficiently generic to process the different types of risk prevention plan (natural risk prevention plans PPRN, technological risk prevention plans PPRT) This data standard does not consist of a complete modelling of a risk prevention plan dossier. The scope of this document is limited to geographical data in the RPPs, whether regulatory or not. Nor is the PPR standard intended to standardise knowledge of hazards. The challenge is to have a description for a homogeneous storage of the geographical data of the RPPs, since these data are of interest to several professions within the ministries responsible for agriculture, on the one hand, and ecology, and on the other hand, sustainable development.COVADIS风险预防计划数据标准涵盖了风险预防计划（Risk Prevention Plans，RPPs）中地理数据数字化存储所需的全部技术与组织规范。该标准覆盖的主要风险包含本国境内可预见的8类主要自然灾害与4类技术风险：前者包括洪水、地震、火山喷发、地面沉降、海岸灾害、雪崩、森林火灾、气旋与风暴；后者涵盖核风险、工业风险、危险物料运输风险以及溃坝风险。 风险预防计划（PPR）由1995年2月2日《加强环境保护法案》确立，而PPR工具则隶属于1987年7月22日《民用安全组织、森林防火与重大风险防治法案》。RPP的编制工作由国家负责，最终由省长审批确定。 无论针对自然风险、技术风险还是多灾害类型，风险预防计划均具备共通性，其包含三类核心信息： • 规制制图：即对受风险影响的领土范围进行地理划定，该边界明确了适用特定规制的区域。此类规制属于地役权范畴，并依据区域面临的灾害等级设定差异化要求，相关区域以覆盖全部研究区域的分区规划图进行呈现。 • 风险源灾害信息：即承载风险成因的灾害文档，此类文档可嵌入汇报材料或作为附件附于RPP之后，用于绘制风险预防计划中所考量的各类灾害的不同强度等级分布。 • 编制问题信息：即在RPP编制过程中识别出的各类问题，也可通过地图形式作为附件附于获批文件之后。 鉴于不同类型PPR之间的共通性，以及实现PPR数据高水平标准化的需求，COVADIS最终选择采用单一数据标准，该标准具备足够的通用性，可适配各类风险预防计划的处理需求，包括自然风险预防计划（Natural Risk Prevention Plans，PPRN）与技术风险预防计划（Technological Risk Prevention Plans，PPRT）。 该数据标准并非对风险预防计划档案的完整建模，其适用范围仅局限于RPP中的地理数据，无论此类数据是否属于规制范畴。同时，PPR标准也并非用于统一灾害相关知识的标准化规范。本次标准制定的核心挑战在于，需为RPP的地理数据提供统一的存储描述规范——此类数据同时受到农业、生态与可持续发展等部门内多个职业领域的关注。