AUSGeoid98 v.1.0 data files: Derby (se51-07)

AUSGeoid98 data files contain a 2 minute grid of AUSGeoid98 data covering the Australian region, which you can use to interpolate geoid-ellipsoid separations for the positions required.You can use your own interpolation software, or you can use Geoscience Australia's Windows Interpolation software (Winter). The data files are text files in a standard format that cover the same area as standard topographic map areas. Files covering both 1:250,000 (approximately 100 x 150 km) and 1:1,000,000 (approximately 400 x 600 km) map areas are available. There is a 4 minute overlap on all sides of each area. Data format: AUSGeoid98 data files have a header record at the start of each file, to distinguish them from the superseded AUSGeoid93 data files. AUSGeoid98 data files show the geoid-ellipsoid separation to 3 decimal places, while the superseded AUSGeoid93 data files showed only 2 decimal places. AUSGeoid98 deflections of the vertical were computed from the geoid-ellipsoid separation surface, while the AUSGeoid93 deflections of the vertical were computed from OSU91A.

AUSGeoid98数据文件包含覆盖澳大利亚全域的2分钟分辨率格网型AUSGeoid98数据集，可用于对指定点位的大地水准面-椭球面差距（geoid-ellipsoid separations）进行插值计算。使用者既可自行开发插值软件开展计算，也可使用澳大利亚地质科学局（Geoscience Australia）推出的Windows版插值工具Winter。该类数据文件采用标准文本格式，其覆盖范围与标准地形图图幅完全匹配。当前可获取比例尺为1:250 000（覆盖范围约100×150千米）与1:1 000 000（覆盖范围约400×600千米）的两类图幅数据文件，所有图幅的四周均设有4分钟的重叠区域。数据格式说明：每份AUSGeoid98数据文件的起始位置均包含头记录，用于与已被取代的AUSGeoid93数据文件进行区分。AUSGeoid98数据文件将大地水准面-椭球面差距保留至小数点后三位，而已被取代的AUSGeoid93数据文件仅保留至小数点后两位。AUSGeoid98的垂线偏差（deflections of the vertical）基于大地水准面-椭球面差距曲面计算得到，而AUSGeoid93的垂线偏差则基于OSU91A重力场模型计算得到。