Surface-groundwater connectivity assessment for the Murray Darling Basin

## **Abstract** \n\nThis dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied.\n\nSurface-groundwater connectivity assessment across thirteeen reporting regions of the Murray-Darling Basin between March 2005 and June 2006. Connectivity mapping was undertaken by Sinclair Knight Merz (SKM) and Bureau Rural Sciences (BRS). CSIRO compiled a whole of basin coverage as part of the Murray-Darling Basin Sustainable Yields project.\n\n\n\nKey Words: WATER Surface water, Mapping; WATER Groundwater, Mapping; Surface-groundwater INTERACTIONS\n\n\n\nThis dataset has been provided to the BA Programme for use within the programme only. Third parties may request a copy of the data from CSIRO. http://www.csiro.au/en/Research/LWF/Areas/Water-resources/Assessing-water-resources/Sustainable-yields/MurrayDarlingBasin\n\n## **Purpose** \n\nOriginal dataset stored at \\\\wron\\Project\\MDB\\All_MDB\\Groundwater\\_SW-GW_connectivity\n\n## **Dataset History** \n\nParameter List: \n\nOriginal attribute tables were edited to provide a uniform flux convention to/from river/groundwater for losing and gaining streams. Direction and magnitude of water flux (ML/day/km) is described for river segments in the xxxx attribute.\n\n\n\nProcessing Steps: \n\nMethodology for determining direction and magnitude of water flux is detailed in report. Assessment were conducted on 13 of the 18 Reporting Regions for the MDBSY project. This data set is a compilation of the 13 regions.\n\n\n\nTools: \n\nArcGIS 9.3 was used to combine the data from thirteen regions into one (whole of basin) coverage.\n\n## **Dataset Citation** \n\nCSIRO (2010) Surface-groundwater connectivity assessment for the Murray Darling Basin. Bioregional Assessment Source Dataset. Viewed 10 December 2018, http://data.bioregionalassessments.gov.au/dataset/35401155-39ff-4769-99d3-f4935387d1f5.

**摘要**

本数据集及其元数据声明由第三方提供给生物区域评估计划（Bioregional Assessment Programme），本文档按原始提供的形式呈现。

本数据集针对2005年3月至2006年6月期间墨累-达令盆地（Murray-Darling Basin）的13个报告区域开展了地表水-地下水连通性评估。连通性制图工作由辛克莱奈特梅尔兹公司（Sinclair Knight Merz，SKM）与农村科学局（Bureau Rural Sciences，BRS）完成。澳大利亚联邦科学与工业研究组织（Commonwealth Scientific and Industrial Research Organisation，缩写CSIRO）作为墨累-达令盆地可持续产量项目（Murray-Darling Basin Sustainable Yields project）的一部分，编制了全盆地覆盖数据集。

**关键词**：地表水 制图；地下水 制图；地表水-地下水交互作用

本数据集仅提供给生物区域评估计划（BA Programme）供其内部使用。第三方如需获取数据集副本，可向澳大利亚联邦科学与工业研究组织（CSIRO）提出申请。相关链接：http://www.csiro.au/en/Research/LWF/Areas/Water-resources/Assessing-water-resources/Sustainable-yields/MurrayDarlingBasin

**用途**

原始数据集存储路径为 \wronProjectMDBAll_MDBGroundwater\_SW-GW_connectivity

**数据集历史**

参数列表：

为实现河流与地下水之间补给、排泄水流的通量统一约定，对原始属性表进行了编辑。河段的水通量方向与大小（单位：兆升/天/千米，ML/day/km）通过xxxx属性字段进行描述。

处理步骤：

水通量方向与大小的确定方法详见相关报告。本次评估覆盖了墨累-达令盆地可持续产量项目（MDBSY project）18个报告区域中的13个，本数据集为这13个区域的整合成果。

工具：

使用ArcGIS 9.3将13个区域的数据整合为一套全盆地覆盖数据集。

**数据集引用**

澳大利亚联邦科学与工业研究组织（CSIRO）(2010) 《墨累-达令盆地地表水-地下水连通性评估》，生物区域评估源数据集。2018年12月10日查阅，来源链接：http://data.bioregionalassessments.gov.au/dataset/35401155-39ff-4769-99d3-f4935387d1f5