TotalControl_cnblz02e3m_rot90

This repository (DOI: 10.11583/DTU.13160606) contains the publicly available data generated during the TotalControl project: https://www.totalcontrolproject.eu/The dataset has been created using EllipSys3D and Flex5 by Niels Troldborg (ORCID 0000-0003-4508-4837, [e-mail]) and Søren Juhl Andersen (ORCID 0000-0002-5935-751X, [e-mail]). It contains both LES precursor simulation data and LES wind farm flow data. The LES wind farm flow data is organized in separate folder for each flow scenario and wind farm orientation. The layout of the TotalControl Reference Wind Farm is shown for all directions in "TotalControlReferenceWindFarmLayout.pdf", where all turbines are numbered. The folders are named according to type of boundary layer, e.g. conventional neutral boundary layer ("cnbl"), the roughness length of for instance z0 = 2e-3 m denoted as "z02e3m", and finally the rotation of the TotalControl reference wind farm within the flow, i.e. "rot90". The public database contains the following cases with corresponding DOI:1. "cnblz02e3m": Precursor dataset using z0 = 2e-3 m without wind farm. DOI: 10.11583/DTU.133531612. "cnblz02e3m_rot00": Reference wind farm simulation using with 0 deg rotation. DOI: 10.11583/DTU.131222243. "cnblz02e3m_rot90": Reference wind farm simulation using with 90 deg rotation. DOI: 10.11583/DTU.13090113Files in each folder are given the corresponding naming where “TCal” corresponds to actuator line (AL) simulations performed in TotalControl(TC), while “TCad” corresponds to actuator disc (AD) simulations. The dataset contains the following three datatypes with example names: 1. Horizontal (xy) planes of flow fields (u, v, and w) extracted at hub height in standard NetCDF format. Naming: TCal_horiz.nc 2. Vertical inflow (yz) planes of flow field (u, v, and w) extracted 1R upstream each of the 32 wind turbine (wt) in standard NetCDF format. Naming: TCal_inflow_wt01.nc 3. Time series of each of the 32 wind turbines and their performance and loads in ascii format. The files contain time, u velocity at hub height, power, flapwise bending moment, for the three blades, tower bottom bending moment fore-aft and side-side, thrust force, blade pitch, and rotational speed. Naming: TCal_wt01.dat Additionally, there is data for the two benchmark cases on wind farm control for FarmConners:https://www.windfarmcontrol.info/The two cases has identical setup as the baseline, but two turbines have been intentionally yawed -20deg and -30deg, where negative corresponds to counterclockwise rotation as seen from above. The two cases are:1. The flow is identical to "z02e3m_rot00", but turbines 5 and 25 have been intentionally yawed -20deg and -30deg, respectively, where negative corresponds to counterclockwise rotation as seen from above. DOI: 10.11583/DTU.132745492. The flow is identical to "z02e3m_rot90", but turbines 32 and 29 have been intentionally yawed -20deg and -30deg, respectively, where negative corresponds to counterclockwise rotation as seen from above. DOI: 10.11583/DTU.13414922Additional data can be made available upon request.

本仓库（DOI: 10.11583/DTU.13160606）收录了由TotalControl项目（https://www.totalcontrolproject.eu/）生成的公开数据。该数据集由Niels Troldborg（ORCID 0000-0003-4508-4837，邮箱：[e-mail]）和Søren Juhl Andersen（ORCID 0000-0002-5935-751X，邮箱：[e-mail]）利用EllipSys3D和Flex5构建。数据集包括大涡模拟（LES）的先导模拟数据以及风电场流场数据。针对每种流场情景和风电场朝向，LES风电场流场数据分别存放在独立的文件夹中。TotalControl参考风电场的布局以所有方向展示于“TotalControlReferenceWindFarmLayout.pdf”文件中，其中所有涡轮机均进行编号。文件夹名称依据边界层类型命名，例如传统中性边界层（cnbl）、粗糙度长度z0 = 2e-3 m（标记为“z02e3m”），以及TotalControl参考风电场在流场中的旋转（rot90）。公开数据库包含以下案例，并附有相应的DOI：

1. “cnblz02e3m”：使用z0 = 2e-3 m进行的先导数据集，无风电场。
DOI: 10.11583/DTU.13353161
2. “cnblz02e3m_rot00”：使用0度旋转的参考风电场模拟。
DOI: 10.11583/DTU.131222243
3. “cnblz02e3m_rot90”：使用90度旋转的参考风电场模拟。
DOI: 10.11583/DTU.13090113

每个文件夹中的文件均具有相应的命名，其中“TCal”对应于在TotalControl（TC）中执行的驱动线（AL）模拟，而“TCad”对应于驱动盘（AD）模拟。数据集包含以下三种数据类型，并以示例名称说明：

1. 在轮毂高度提取的水平（xy）平面流场（u, v和w）的NetCDF标准格式数据。命名：TCal_horiz.nc
2. 在每个32台风机上游1R处提取的垂直进气（yz）平面流场（u, v和w）的NetCDF标准格式数据。命名：TCal_inflow_wt01.nc
3. 每个风机的性能和载荷的时间序列数据，以ASCII格式存储。文件包含时间、轮毂高度处的u速度、功率、翼型弯曲矩（三个叶片）、塔底弯曲矩前后和侧面侧面、推力、桨距和转速。命名：TCal_wt01.dat

此外，还提供了针对FarmConners风电场控制的两个基准案例数据：https://www.windfarmcontrol.info/。这两个案例与基线设置相同，但两个涡轮机有意地向逆时针方向（从上方观察）旋转-20度和-30度，其中负值表示逆时针旋转。这两个案例是：

1. 流场与“z02e3m_rot00”相同，但第5号和第25号涡轮机分别有意旋转-20度和-30度。
DOI: 10.11583/DTU.13274549
2. 流场与“z02e3m_rot90”相同，但第32号和第29号涡轮机分别有意旋转-20度和-30度。
DOI: 10.11583/DTU.13414922

根据请求，可提供其他数据。