ACSApplMaterInterfaces2020_12_44195_Ceamanos_Fig2

Dataset corresponding to the underlying data of PRIME scientific publications - Publication Title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions - Publication Reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 - Figure 2 caption: Thermomechanical response of a uniaxially oriented strip (90 μm thick) with the director along its long axis. (a) Weight of 1 g attached to the extreme of the strip lifted upon heating. (i−iii) Camera images acquired on heating from (i) 30 °C to (ii) 100 °C and (iii) at 30 °C again after cooling down. (b) Temperature dependence of normalized length and width of the LCE strip during the heating process. The strip length and width were measured at 30 °C(L0 andW0, respectively) and during the temperature increase of the cycle (L and W, respectively). PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010本数据集对应PRIME科学出版物的底层原始数据。 - 论文标题：《具备快速光致力学响应、面向光驱动机器人功能的四维打印液晶弹性体（Liquid Crystalline Elastomer）驱动器》 - 论文引用信息：《ACS Appl. Mater. Interfaces》2020年，第12卷第39期，第44195页 - 论文DOI：10.1021/acsami.0c13341 - 图2说明：单轴取向条带（厚度90μm）的热机械响应，其指向矢（director）沿条带长轴方向分布。(a) 悬挂于条带末端的1g砝码在加热过程中被抬起；(i~iii) 加热过程中采集的相机图像：(i) 30℃时、(ii) 升温至100℃时，以及(iii) 冷却后重回30℃时的图像。(b) 加热循环过程中液晶弹性体（Liquid Crystalline Elastomer，LCE）条带归一化长度与宽度随温度的变化关系。实验以30℃时的条带长度（L0）与宽度（W0）作为基准，循环升温过程中分别测量对应时刻的条带长度L与宽度W。 PRIME项目：面向新一代主动式微流控器件的先进多功能打印平台。本项目已获得欧盟地平线2020研究与创新计划资助，资助协议编号为829010。