Development of a 2D HXR imaging system on the HL-3 tokamak

This data package contains a total of 6 files, which are the original data for Figure 8 and Figure 10 in the article "Development of a Two-Dimensional Hard X-Ray Imaging System on the HL-3 Tokamak". They are respectively the original data of the energy spectra measured by the detector and the energy deposition of photons in its scintillator measured by the detector.<br>Files and variablesFile: Run11_PHA_LG_0_0_fig8_left.txtDescription: The data used to plot the energy spectrum in Figure 8 (left).Variables:The count of photons. The row number corresponding to this data is the channel address of the detector.<br>File: Run13_list_fig8_right.txtDescription: In Figure 8 (right), it is the original data obtained when the detector measures the energy spectrum. It records the photon energy measured instantaneously for a certain channel (ch0) and the corresponding time.Variables:Brd：The serial number of the electronics systemCh：The serial numbers of the measurement channels usedLG：The photon energy measured by the "low gain" amplification chainHG：It was not turned on, so there is no dataTstamp_us：The timestamp of the measured photonsTrgID：Trigger sequence numberNHits：The number of valid measurement channels<br>File: Run13_PHA_LG_0_0_fig8_right.txtDescription: The data for drawing the energy spectrum in Figure 8 (right).Variables:The count of photons. The row number corresponding to this data is the channel address of the detector.<br>File: Run59_list_fig10_right.txtDescription: In Figure 10 (right), it is the original data of the photon count on the detector. It records the number of photons measured by all channels at each moment.Variables:Brd：The serial number of the electronics systemCh：The serial numbers of the measurement channels usedCnt：countTstamp_us：The timestamp corresponding to the triggerTrgID：Trigger sequence numberNHits：The number of valid measurement channels<br>File: Run61_list_fig10_left.txtDescription: In Figure 10 (left), it is the original data of the photon count on the detector. It records the number of photons measured by all channels at each moment.Variables:Brd：The serial number of the electronics systemCh：Channel numberCnt：CountTstamp_us：The timestamp corresponding to the triggerTrgID：Trigger serial numberNHits：The number of valid measurement channels<br>File: Run11_list_fig8_left.txtDescription: In Figure 8 (left), it is the original data obtained when the detector measures the energy spectrum. It records the photon energy measured instantaneously by a certain channel (ch0) and the corresponding time.Variables:Brd：Serial number of the electronics systemCh：The serial number of the measurement channel usedLG：The photon energy measured by the "low gain" amplification chainHG：It is not activated, so there is no dataTstamp_us：The timestamp of the measured photonsTrgID：Trigger serial numberNHits：The number of valid measurement channels<br>