Buildings for residential use and occupants, according to type, time of construction, number of floors and number of dwellings, per municipality, in Ticino, from 2013 to 2022
收藏资源简介：
Buildings for residential use and occupants, by type, time of construction, number of floors and number of dwellings, per municipality, in Ticino, from 2013 to 2022 [Source: Building and housing statistics (SEA), Federal Statistical Office, Neuchâtel](https://www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.sources&theme=46&id=344&proID=316) [Processing: Statistical Office (Ustat), Giubiasco](https://www.ti.ch/ustat) Data version: 26.09.2023 Last modified: 15.05.2024 Variables in the data cube: Year: year of detection (at 31.12) Municipality: Name of the municipality where the building is located (state of political municipalities - 106, since 10.04.2022) Type_building: type of building for residential use Period_construction: construction period of the building Floors_number: Number of floors in the building Number of dwellings: Number of dwellings in the building Description of statistics: Buildings: Number of Occupying Buildings: Number of occupants in the building The ‘info’ column contains one of the following information: OK: the data is available for the crossing of the selected variables ...: data not available or meaningless ( ): Data not published due to insufficient statistical reliability (figure): statistical reliability of relative data (based on too few observations) X: data not published for data protection reasons Note: Category "0 dwellings" in the variable "Number_dwellings" includes partially residential buildings that have only dwelling units without kitchen or only makeshift dwellings. To contain the size of the data cube, a time series from 2013 onwards is proposed. On request, data are available since 2009. [Signs, symbols, abbreviations, abbreviations and statistical concepts used in Ustat products](http://www4.ti.ch/fileadmin/DFE/DR-USTAT/Products/Definitions/signs_sigle_simboli.pdf) Glossary: [Type of building for residential use](https://www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.glossary&id=2644&theme=46) [Time of construction](https://www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.glossary&id=379&theme=46) [Dwellings](https:///www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.glossary&id=2641&thema=46) [Occupiers](https:///www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.glossary&id=2641&thema=46)
本数据集涵盖2013年至2022年瑞士提契诺州（Ticino）各市镇辖区内，按建筑类型、建造年代、楼层数、住宅套数分类的住宅建筑及居住人口数据。 【数据来源：瑞士联邦统计局（Federal Statistical Office）纳沙泰尔分局建筑与住房统计（Building and housing statistics, SEA）】，详见：https://www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.sources&theme=46&id=344&proID=316 【数据处理：吉亚斯科统计办公室（Ustat）】，详见：https://www.ti.ch/ustat 本数据集数据版本为2023年9月26日，最后更新时间为2024年5月15日。 数据立方包含以下变量： 1. 统计年份（Year）：截至当年12月31日的统计检测年份 2. 市镇辖区（Municipality）：建筑所在的政治市镇辖区名称（自2022年4月10日起，辖区总数为106个） 3. 住宅建筑类型（Type_building）：住宅建筑的分类类型 4. 建造时期（Period_construction）：建筑的建造年代区间 5. 楼层数（Floors_number）：建筑总楼层数 6. 住宅套数（Number of dwellings）：建筑内的住宅套数 统计指标说明： 本数据集包含两类核心统计指标：建筑总量（Buildings）、建筑居住人口数（Occupying Buildings，即建筑内的居住人口数量）。 数据立方的「info」列取值说明如下： - OK：所选变量交叉维度下数据可用 - ...：数据不可用或无统计意义 - ( )：因统计可靠性不足未发布的数据 - (数字)：相对数据的统计可靠性评级（基于观测样本量过少） - X：因数据保护原因未发布的数据 注：变量「住宅套数（Number_dwellings）」中的「0套住宅」类别，涵盖仅设有无厨房居住单元的半住宅建筑，或仅设有临时住所的建筑。 为控制数据立方的规模，本数据集仅提供2013年起的时序数据；如有需求，可提供2009年起的历史数据。 相关参考文档： 1. [Ustat产品使用标识、符号、缩写及统计概念说明](http://www4.ti.ch/fileadmin/DFE/DR-USTAT/Products/Definitions/signs_sigle_simboli.pdf) 2. [术语表：住宅建筑类型](https://www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.glossary&id=2644&theme=46) 3. [术语表：建造年代](https://www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.glossary&id=379&theme=46) 4. [术语表：住宅套数](https:///www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.glossary&id=2641&thema=46) 5. [术语表：居住人口](https:///www3.ti.ch/DFE/DR/USTAT/index.php?fuseaction=definitions.glossary&id=2641&thema=46)
