Temperature and chemical composition of combustion gases over reaction time in several combustion tests conducted at a lab pilot plant to characterise a SRF prepared for an aluminium scrap pre-heating system (REVaMP project)

Open access to experimental data generated by the REVaMP project (GA 869882, Horizon 2020, European Union) along the research of the combustion of a SRF, prepared from ASR, to be used as alternative fuel in a scrap pre-heater at an aluminium refinery plant.Research pertaining to Task 1.1 (WP1), Deliverable D1. 
Underlying data for the publication Acha, E.; Lopez-Urionabarrenechea, A.;Delgado, C.; et al. Combustion of a Solid Recovered Fuel (SRF) Produced from the Polymeric Fraction of Automotive Shredder Residue (ASR). Polymers 2021, 13, 3807. https://doi.org/10.3390/polym13213807. Data related to Figures 3, 4, 5 in the article and Figures S3 and S5 of Supplementary materials of the manuscript.

Subject: Study of the combustion of a SRF prepared from ASR in a lab-scale pilot plant consisting of a tank reactor and a packed-bed tubular reactor arranged in series, to evaluate the effects on kinetics and thermodynamics of the temperature and the type and flow rate of the oxidiser. Real-time measurements of the temperature of the tank, temperature of the gases and of the concentrations of O2, CO2, CO, N2O, NO2, NO, NH3, SO2, CH4, C2H6, C2H4, C3H8, C6H14, CH2O, HCl and HF in the combustion gases produced in 5 combustion runs performed at different reaction conditions. Useful information for designing the operation conditions of the SRF combustion chamber of the scrap pre-heater and for defining the flue gas cleaning requirements.