CLM groundwater model hydraulic property data

## **Abstract** \n\nThe dataset was derived by the Bioregional Assessment Programme from multiple source datasets. The source datasets are identified in the Lineage field in this metadata statement. The processes undertaken to produce this derived dataset are described in the History field in this metadata statement. \n\n\n\nThis dataset containts multiple folders holding data on hydraulic properties for the CLM groundwater model.\n\n\n\n1.\tData in folder "lay1"\n\nData in folder "lay1" is for the alluvial aquifer within the groundwater model domain. \n\n\n\n2.\tData in folder "lay2_3_4"\n\nAll the data from the BMO group (consisting of the Bungil Formation, Mooga Sandstone and the Orallo Formation), the Gubberamunda Sandstone, the Westbourne Formation, and the Springbok Sandstone of the Surat Basin were combined. The resulting patterns of the hydraulic conductivity versus depth relationship were then used to inform an initial parameter range that constrains the Kx of the Grafton Formation (model layer2), the Bungawalbin Member (model layer 3) and the Kangaroo Creek Sandstone Member (model layer 4) in the Richmond river basin. \n\n3.\tData in folder "lay5_6"\n\nData from the Walloon Coal Measures in the Surat Basin (Bioregional Assessment Programme, Dataset 3) were used to constrain parameter variation in the Maclean Sandstone Member (model layer 5) and the Walloon Coal Measures (model layer 6).\n\n## **Purpose** \n\nThe data was derived to constrain the hydraulic property change in the Clarence-Moreton groundwater model.\n\n## **Dataset History** \n\n1.\tData in folder "lay1"\n\nData in folder "lay1" is for the alluvial aquifer within the groundwater model domain. It was derived by using the groundwater model boundary (Bioregional Assessment Programme, Dataset 1) to filter the hydraulic property data generated in companion product 2.1/2.2 (Bioregional Assessment Programme, Dataset 2). \n\n2.\tData in folder "lay2_3_4"\n\nDue to a lack of bedrock aquifer data in the Clarence-Moreton bioregion, relevant data were sourced from hydrogeological strata in the Surat Basin (Bioregional Assessment Programme, Dataset 3), where much more data is available. However, as the correlation between the sedimentary bedrock stratigraphic units above the Walloon Coal Measures in the Surat and Clarence-Moreton basins is poorly understood, it is not possible to directly use the hydraulic parameters from a particular unit in the Surat Basin to inform the hydraulic characteristics of a unit in the Clarence-Moreton Basin. Instead, all the data from the BMO group (consisting of the Bungil Formation, Mooga Sandstone and the Orallo Formation), the Gubberamunda Sandstone, the Westbourne Formation, and the Springbok Sandstone of the Surat Basin were combined. The resulting patterns of the hydraulic conductivity versus depth relationship were then used to inform an initial parameter range that constrains the Kx of the Grafton Formation (model layer2), the Bungawalbin Member (model layer 3) and the Kangaroo Creek Sandstone Member (model layer 4) in the Richmond river basin. \n\n3.\tData in folder "lay5_6"\n\nData from the Walloon Coal Measures in the Surat Basin (Bioregional Assessment Programme, Dataset 3) were used to constrain parameter variation in the Maclean Sandstone Member (model layer 5) and the Walloon Coal Measures (model layer 6).\n\n\n\nReferences:\n\nDataset 1 Bioregional Assessment Programme (2015) CLM Groundwater Model Boundary. Bioregional Assessment Derived Dataset. Viewed 30 July 2015, http://data.bioregionalassessments.gov.au/dataset/dd691d5c-48a2-42fd-9902-4770c871b50f\n\nDataset 2 Bioregional Assessment Programme (2014) CLM - Hydraulic conductivity QLD. Bioregional Assessment Derived Dataset. Viewed 30 July 2015, http://data.bioregionalassessments.gov.au/dataset/1e181f78-d670-4e1b-ae74-67ee66e28e80\n\nDataset 3 Bioregional Assessment Programme (2014) State Transmissivity Estimates for Hydrogeology Cross-Cutting Project. Bioregional Assessment Derived Dataset. Viewed 30 April 2015, http://data.bioregionalassessments.gov.au/dataset/db6643ff-f4ec-4aa3-9f5d-afdce1bce5b1\n\n## **Dataset Citation** \n\nBioregional Assessment Programme (2015) CLM groundwater model hydraulic property data. Bioregional Assessment Derived Dataset. Viewed 28 September 2017, http://data.bioregionalassessments.gov.au/dataset/e2444e2a-2c5d-4c07-9685-145d82adf131.\n\n## **Dataset Ancestors** \n\n* **Derived From** [Qld 100K mapsheets - Mount Lindsay](https://data.gov.au/data/dataset/3031172f-ec23-4c4d-835f-0772da8829ba)\n\n* **Derived From** [Qld 100K mapsheets - Helidon](https://data.gov.au/data/dataset/b3f4f1b5-a2fd-40fc-b35b-78b100a50dcb)\n\n* **Derived From** [Qld 100K mapsheets - Ipswich](https://data.gov.au/data/dataset/71d610f7-084a-44c6-afa3-f0763396239b)\n\n* **Derived From** [Qld 100K mapsheets - Toowoomba](https://data.gov.au/data/dataset/5b8bf9c4-d127-45c5-9fef-a71013331d86)\n\n* **Derived From** [CLM - Walloon Coal Measures spatial extent](https://data.gov.au/data/dataset/a6f029c1-b57a-496a-b6ad-2f017cc89702)\n\n* **Derived From** [Qld 100k mapsheets - Warwick](https://data.gov.au/data/dataset/3e2fa307-1f06-4873-96d3-5c3e5638894a)\n\n* **Derived From** [CLM - Geology NSW & Qld combined v02](https://data.gov.au/data/dataset/982bd271-5ce8-48cf-b3cf-c50550509baa)\n\n* **Derived From** [State Transmissivity Estimates for Hydrogeology Cross-Cutting Project](https://data.gov.au/data/dataset/db6643ff-f4ec-4aa3-9f5d-afdce1bce5b1)\n\n* **Derived From** [Natural Resource Management (NRM) Regions 2010](https://data.gov.au/data/dataset/1d54e38f-4051-4f0c-a350-c7dbd8eba65b)\n\n* **Derived From** [Qld 100k mapsheets - Kingaroy](https://data.gov.au/data/dataset/01f58f60-9688-4b62-9de9-7e58aa0eeeb6)\n\n* **Derived From** [Victorian Groundwater Management System Dec 2012 (superseded)](https://data.gov.au/data/dataset/0e144947-4b0c-4c31-b605-9ecabdf2730b)\n\n* **Derived From** [GEODATA TOPO 250K Series 3, File Geodatabase format (.gdb)](https://data.gov.au/data/dataset/96ebf889-f726-4967-9964-714fb57d679b)\n\n* **Derived From** [GEODATA TOPO 250K Series 3](https://data.gov.au/data/dataset/a0650f18-518a-4b99-a553-44f82f28bb5f)\n\n* **Derived From** [NSW Catchment Management Authority Boundaries 20130917](https://data.gov.au/data/dataset/0dc4272e-c081-4ed4-9645-aa336ffacd85)\n\n* **Derived From** [Geological Provinces - Full Extent](https://data.gov.au/data/dataset/0a064b3b-2a1e-4672-80d9-03333be67aad)\n\n* **Derived From** [QLD Department of Natural Resources and Mining Groundwater Database Extract 20131111](https://data.gov.au/data/dataset/827e70b3-29d5-4e89-8d59-a93bc499de60)\n\n* **Derived From** [Qld 100K mapsheets - Allora](https://data.gov.au/data/dataset/46a276a3-fa56-4b1c-8aa4-0af90d28756b)\n\n* **Derived From** [Qld 100K mapsheets - Jandowae](https://data.gov.au/data/dataset/0e11158d-8dbb-453b-9bf0-f79fa3fa1d89)\n\n* **Derived From** [CLM - Hydraulic conductivity NSW](https://data.gov.au/data/dataset/cecfa372-52ca-49f8-b61c-6506279eafb5)\n\n* **Derived From** [Bioregional Assessment areas v03](https://data.gov.au/data/dataset/96dbf469-5463-4f4d-8fad-4214c97e5aac)\n\n* **Derived From** [Qld 100K mapsheets - Esk](https://data.gov.au/data/dataset/9e7334b7-fbb0-4893-bd08-ac296ce9a4fb)\n\n* **Derived From** [CLM - Qld Surface Geology Mapsheets](https://data.gov.au/data/dataset/a040de87-21b1-4097-a273-41471405ab28)\n\n* **Derived From** [CLM Groundwater Model Boundary](https://data.gov.au/data/dataset/dd691d5c-48a2-42fd-9902-4770c871b50f)\n\n* **Derived From** [Clarence-Moreton SEEBASE & Structural GIS Project data.](https://data.gov.au/data/dataset/b1690f8b-4025-45d2-96a0-6feb03ff3e52)\n\n* **Derived From** [CLM - NSW Surface Geology Mapsheets in the Clarence-Moreton bioregion](https://data.gov.au/data/dataset/a1f5c7b3-ea1f-4ef0-9d05-f54e81f4c7b6)\n\n* **Derived From** [NSW Office of Water Pump Test dataset](https://data.gov.au/data/dataset/d8f1062f-97d5-4d78-9ca8-b5719fe3fced)\n\n* **Derived From** [Qld 100k mapsheets - Beenleigh](https://data.gov.au/data/dataset/f2eb7c75-52c5-4738-b7b7-76ec31b7f7ee)\n\n* **Derived From** [Qld 100K mapsheets - Caboolture](https://data.gov.au/data/dataset/cee55c9c-29f9-4733-aac9-9b82a2ff739f)\n\n* **Derived From** [Qld 100k mapsheets - Murwillumbah](https://data.gov.au/data/dataset/c9852e4a-1084-4fdb-a538-17b89736205d)\n\n* **Derived From** [Bioregional Assessment areas v01](https://data.gov.au/data/dataset/0fd0d820-30b3-451f-a126-a50040426999)\n\n* **Derived From** [Bioregional Assessment areas v02](https://data.gov.au/data/dataset/e414b1b3-c42e-42e9-9cc4-2093054aa35f)\n\n* **Derived From** [Qld 100K mapsheets - Inglewood](https://data.gov.au/data/dataset/32869100-6b73-44a4-bcef-c58e380d0b7d)\n\n* **Derived From** [Qld 100K mapsheets - Oakey](https://data.gov.au/data/dataset/9b5ef250-c085-4365-b9c0-bb34e0b56150)\n\n

## **摘要**

本数据集由生物区域评估计划（Bioregional Assessment Programme）基于多源数据集衍生所得。本元数据声明中的“谱系（Lineage）”字段已列明全部源数据集，而“历史（History）”字段则详细记述了本衍生数据集的生成流程。

本数据集包含多个文件夹，存储了CLM地下水模型（CLM groundwater model）所需的水力性质数据。

1. “lay1”文件夹数据

该文件夹内的数据对应地下水模型域内的冲积含水层（alluvial aquifer）。

2. “lay2_3_4”文件夹数据

本文件夹整合了苏里特盆地（Surat Basin）内BMO群（包括邦吉尔组、穆加砂岩及奥罗组）、古伯拉门达砂岩、韦斯特本组以及斯普林博克砂岩的全部数据。基于所得导水率（hydraulic conductivity）随深度变化的分布特征，为里士满河流域内格拉夫顿组（模型第2层）、邦加瓦尔宾段（模型第3层）与袋鼠溪砂岩段（模型第4层）的x方向导水率（Kx）设置初始约束参数范围。

3. “lay5_6”文件夹数据

本数据集使用苏里特盆地沃隆煤层组（Walloon Coal Measures）的数据（生物区域评估计划，数据集3），为麦克莱恩砂岩段（模型第5层）与沃隆煤层组（模型第6层）的参数变异设置约束条件。

## **用途**

本数据集旨在约束克拉伦斯-莫顿（Clarence-Moreton）地下水模型的水力性质变化。

## **数据集历史**

1. “lay1”文件夹数据

该文件夹内的数据对应地下水模型域内的冲积含水层。其生成方式为：使用地下水模型边界数据（生物区域评估计划，数据集1）对配套产品2.1/2.2（生物区域评估计划，数据集2）生成的水力性质数据进行筛选。

2. “lay2_3_4”文件夹数据

由于克拉伦斯-莫顿生物区域内缺乏基岩含水层（bedrock aquifer）数据，相关数据从数据储量更为丰富的苏里特盆地水文地质地层（hydrogeological strata）中获取（生物区域评估计划，数据集3）。但由于沃隆煤层组上方的沉积基岩地层单元在苏里特盆地与克拉伦斯-莫顿盆地之间的对应关系尚不明确，无法直接使用苏里特盆地某一地层的水力参数来表征克拉伦斯-莫顿盆地对应地层的水力特征。因此，本研究整合了苏里特盆地内BMO群（包括邦吉尔组、穆加砂岩及奥罗组）、古伯拉门达砂岩、韦斯特本组以及斯普林博克砂岩的全部数据，基于所得导水率随深度变化的分布特征，为里士满河流域内格拉夫顿组（模型第2层）、邦加瓦尔宾段（模型第3层）与袋鼠溪砂岩段（模型第4层）的x方向导水率设置初始约束参数范围。

3. “lay5_6”文件夹数据

本数据集使用苏里特盆地沃隆煤层组的数据（生物区域评估计划，数据集3），为麦克莱恩砂岩段（模型第5层）与沃隆煤层组（模型第6层）的参数变异设置约束条件。

参考文献：

数据集1 生物区域评估计划（2015）CLM地下水模型边界。生物区域评估衍生数据集。2015年7月30日查阅，http://data.bioregionalassessments.gov.au/dataset/dd691d5c-48a2-42fd-9902-4770c871b50f

数据集2 生物区域评估计划（2014）CLM - 昆士兰州导水率。生物区域评估衍生数据集。2015年7月30日查阅，http://data.bioregionalassessments.gov.au/dataset/1e181f78-d670-4e1b-ae74-67ee66e28e80

数据集3 生物区域评估计划（2014）水文地质跨区域项目状态导水率估算值。生物区域评估衍生数据集。2015年4月30日查阅，http://data.bioregionalassessments.gov.au/dataset/db6643ff-f4ec-4aa3-9f5d-afdce1bce5b1

## **数据集引用**

生物区域评估计划（2015）CLM地下水模型水力性质数据。生物区域评估衍生数据集。2017年9月28日查阅，http://data.bioregionalassessments.gov.au/dataset/e2444e2a-2c5d-4c07-9685-145d82adf131。

## **数据集溯源**

* **衍生自** [昆士兰州10万比例尺地形图-林德山](https://data.gov.au/data/dataset/3031172f-ec23-4c4d-835f-0772da8829ba)

* **衍生自** [昆士兰州10万比例尺地形图-赫利顿](https://data.gov.au/data/dataset/b3f4f1b5-a2fd-40fc-b35b-78b100a50dcb)

* **衍生自** [昆士兰州10万比例尺地形图-伊普斯维奇](https://data.gov.au/data/dataset/71d610f7-084a-44c6-afa3-f0763396239b)

* **衍生自** [昆士兰州10万比例尺地形图-图文巴](https://data.gov.au/data/dataset/5b8bf9c4-d127-45c5-9fef-a71013331d86)

* **衍生自** [CLM-沃隆煤层组空间范围](https://data.gov.au/data/dataset/a6f029c1-b57a-496a-b6ad-2f017cc89702)

* **衍生自** [昆士兰州10万比例尺地形图-沃里克](https://data.gov.au/data/dataset/3e2fa307-1f06-4873-96d3-5c3e5638894a)

* **衍生自** [CLM-新南威尔士州与昆士兰州联合地质图v02](https://data.gov.au/data/dataset/982bd271-5ce8-48cf-b3cf-c50550509baa)

* **衍生自** [水文地质跨区域项目状态导水率估算值](https://data.gov.au/data/dataset/db6643ff-f4ec-4aa3-9f5d-afdce1bce5b1)

* **衍生自** [2010年自然资源管理区域](https://data.gov.au/data/dataset/1d54e38f-4051-4f0c-a350-c7dbd8eba65b)

* **衍生自** [昆士兰州10万比例尺地形图-金格罗伊](https://data.gov.au/data/dataset/01f58f60-9688-4b62-9de9-7e58aa0eeeb6)

* **衍生自** [2012年12月维多利亚州地下水管理系统（已废止）](https://data.gov.au/data/dataset/0e144947-4b0c-4c31-b605-9ecabdf2730b)

* **衍生自** [GEODATA 25万比例尺地形系列3，文件地理数据库格式(.gdb)](https://data.gov.au/data/dataset/96ebf889-f726-4967-9964-714fb57d679b)

* **衍生自** [GEODATA 25万比例尺地形系列3](https://data.gov.au/data/dataset/a0650f18-518a-4b99-a553-44f82f28bb5f)

* **衍生自** [新南威尔士州流域管理局边界 20130917](https://data.gov.au/data/dataset/0dc4272e-c081-4ed4-9645-aa336ffacd85)

* **衍生自** [地质省-全范围](https://data.gov.au/data/dataset/0a064b3b-2a1e-4672-80d9-03333be67aad)

* **衍生自** [昆士兰州自然资源与采矿部地下水数据库摘录 20131111](https://data.gov.au/data/dataset/827e70b3-29d5-4e89-8d59-a93bc499de60)

* **衍生自** [昆士兰州10万比例尺地形图-阿洛拉](https://data.gov.au/data/dataset/46a276a3-fa56-4b1c-8aa4-0af90d28756b)

* **衍生自** [昆士兰州10万比例尺地形图-扬多瓦](https://data.gov.au/data/dataset/0e11158d-8dbb-453b-9bf0-f79fa3fa1d89)

* **衍生自** [CLM-新南威尔士州导水率](https://data.gov.au/data/dataset/cecfa372-52ca-49f8-b61c-6506279eafb5)

* **衍生自** [生物区域评估区域v03](https://data.gov.au/data/dataset/96dbf469-5463-4f4d-8fad-4214c97e5aac)

* **衍生自** [昆士兰州10万比例尺地形图-埃斯克](https://data.gov.au/data/dataset/9e7334b7-fbb0-4893-bd08-ac296ce9a4fb)

* **衍生自** [CLM-昆士兰州地表地质图幅](https://data.gov.au/data/dataset/a040de87-21b1-4097-a273-41471405ab28)

* **衍生自** [CLM地下水模型边界](https://data.gov.au/data/dataset/dd691d5c-48a2-42fd-9902-4770c871b50f)

* **衍生自** [克拉伦斯-莫顿SEEBASE与结构GIS项目数据](https://data.gov.au/data/dataset/b1690f8b-4025-45d2-96a0-6feb03ff3e52)

* **衍生自** [克拉伦斯-莫顿生物区域内CLM-新南威尔士州地表地质图幅](https://data.gov.au/data/dataset/a1f5c7b3-ea1f-4ef0-9d05-f54e81f4c7b6)

* **衍生自** [新南威尔士州水资源办公室抽水试验数据集](https://data.gov.au/data/dataset/d8f1062f-97d5-4d78-9ca8-b5719fe3fced)

* **衍生自** [昆士兰州10万比例尺地形图-比灵利](https://data.gov.au/data/dataset/f2eb7c75-52c5-4738-b7b7-76ec31b7f7ee)

* **衍生自** [昆士兰州10万比例尺地形图-卡布尔彻](https://data.gov.au/data/dataset/cee55c9c-29f9-4733-aac9-9b82a2ff739f)

* **衍生自** [昆士兰州10万比例尺地形图-穆尔维尔巴姆](https://data.gov.au/data/dataset/c9852e4a-1084-4fdb-a538-17b89736205d)

* **衍生自** [生物区域评估区域v01](https://data.gov.au/data/dataset/0fd0d820-30b3-451f-a126-a50040426999)

* **衍生自** [生物区域评估区域v02](https://data.gov.au/data/dataset/e414b1b3-c42e-42e9-9cc4-2093054aa35f)

* **衍生自** [昆士兰州10万比例尺地形图-英格尔伍德](https://data.gov.au/data/dataset/32869100-6b73-44a4-bcef-c58e380d0b7d)

* **衍生自** [昆士兰州10万比例尺地形图-奥基](https://data.gov.au/data/dataset/9b5ef250-c085-4365-b9c0-bb34e0b56150)